| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | DRIVE SYSTEMS FOR THE FOOD IND^glte^^ | | |
| | | _L_j SOMER | | |
| | | |
| | | |
| | | VERY HARSH ATMOSPHERE | | |
| | | |
| | | f^KP teste High-pressure cleaning with Ii,waterat80oC, up to 130bar, inalldirections | | |
| | | Saline mist Withstand600hours (in accordance with ISO 9227) | | |
| | | IP56/IP66 tests Conformingtostandard IEC60034-5 | | |
| | | KP tests Increasedresistanceto knocks on the paintwork | | |
| | | 1 | | |
| | | ! | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | Options - Stainless steel shaft - Winding with epoxy coating | | |
| | | - Non-ventilated cast iron motors, S1 duty - 0.25 to 4 kW - Stainless steel screws and tie rods - Special anti-corrosion surface protection - RAL 9010 epoxyfinish - Variable speed at constant torque in S1 duty (5 to 50 Hz) | | |
| | | /P56 KP J | | |
| | | |
| | | |
| | | |
| | | SA/e/tf: Sea/s, deflectors and sealed bearings Terminal box with enhanced dustand damp protection: Special seal, screws and cable gland | | |
| | | |
| | | GEARED MOTORS | | |
| | | MULTIBLOC IA | | COMPABLOC IA | | |
| | | |
| | | - Cast iron geared motors - Retention zones eliminated - Blanking of machining holes - RAL 9010 epoxy finish - Special anti-corrosion surface protection - Variable speed at constant torque in S1 duty (5 to 50 HZ) Options - H1 edible oil - Compabloc IA: stainless steel gearbox shaft | | |
| | | r ip66 kp^S | | |
| | | IP66 kp | | |
| | | |
| | | Hollow hub with helical grooves: Formaximum ease ofassemblyand disassembly Sealing cartridge: Allows high-pressure cleaning and ensures the coupling with the clientshaftis protected from corrosion | | |
| | | Supplied with cation ofgrease | | |
| | | |
| | | |
| | | |
| | | 5 | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |