Text version of the page

CS Plus Jr. H2C

FEATURES

N Solid state design with high- efficiency sealing head N Heat On light (green color): informs the operator when the sealing head is energized N Stainless steel, NEMA 4X sealing head N Easy Height Adjustment: the sealing head can be installed on either a customer-supplied fixture or a LEPEL- manufactured Stationary Stand with a convenient hand crank N Versatile Connectivity: connects to the Energy Unit via a standard 6 ft. (183 cm) cable (optional extension up to 15 ft.) with a 10-pin connector N Optimized Output Design: the sealing head can seal foil sizes from 28–100mm — without skewing — at conveyor speeds from 20–45 ft./minute, depending on the size, material, and cap construction, etc. N Coil Auto-Detection Capability: Energy Unit recognizes in-line as well as hand-held sealing heads, automatically limiting output power to each coil

SPECIFICATIONS BENEFITS

Input Voltage 95–245 V AC 50/60 Cycle

N Increased production N No maintenance or cleaning

Phase 1

N Reduced cost of upgrading N Smooth, precise adjustment of sealing head height

Power Rating 1kW at 110 V AC 1.2kW at 220 V AC

N Water-free: requires no water system or plumbing

Ambient 32–97°F Temperature Range (0–36°C) In-Line Head:

ACCESSORIES

Length 20.25" (51.4 cm) Width 12.5" (31.7 cm)

N Hand-Held Sealing Heads: Four hand-held sealing head options are available: – Small for caps from 5mm to 58mm – Large for caps from 20mm to 83mm – Extra large for caps from 20mm to 120mm –

including heat sink Height 5" (12.7 cm) Weight 44.25 lb. (20.1 kg)

Special for Yorker, sport caps, etc. from 5mm to 38mm

Stationary Stand: Weight 80 lb. (39.29 kg) Adjustable from Min 34" (86.4 cm) floor to bottom Max 54" (13.72 cm) of sealing head Lepel Corporation 200 G Executive Dr. • Edgewood, NY 11717Phone: 631-586-3300 • Fax: 631-586-3232 Lepel Cap Sealing 730 Larry Ct. • Waukesha, WI 53186 Phone: 262-782-0450 • Fax: 262-782-3299 800-231-6008 • sales@cap-sealing.com • www.lepel.com