Design - 8200 Plug-in modules EMZ 8276IB monitor module As standard, the 8200 frequency inverter has a 0 - 6 V analog output. If this output is not used as an indicator but is required in another controller, a 0 - 10 V voltage is oftenrequired. The output voltage is converted as necessaryby the monitor module. Connection with external power supply Connection with internal power supply

82xx 82xx

GND 1GND 2 K1 K1GND 2GND 1

Vcc 12V / 15V 3k 3k 3k3 3k3Vref 5,2V> 100k Vcc 12V / 15V <100kVref 5,2V

62789K11K12K142028E1E2E3E439

PE

62789K11K12

K14

2028E1E2E3E439

8276IB 8276IB

62789K11K12K14 62789K11K12K14

JOG1JOG2 DC brakeCCW rotation Ctrl. enable JOG1JOG2 DC brakeCCW rotation Ctrl. enable

0...10 V2 or5 mA 0...10 V2 or5 mA

12...30 V

-+

R > 1k R > 1k

EMZ 8278IB bipolar input module In some applications, the setpoint and direction of rotation are preset via a bipolar voltage ±10 V. The bipolar analog module can be used to connect this voltage directly. This enables a direct connection to be established between the open-loop control and the controller. This solution can be particularly useful in transportation and material handling applications. R/L connection on two terminals(fail-safe) R/L connection on one terminal

C007 = -14-...-22- C007 = -0-...-13-

82xx 82xx

GND int.K1GND ext. GND 1GND 2 K1PE

3k3<100kVref 5,2V Vcc 12V / 15V 3k 3k3<100kVref 5,2V Vcc 12V / 15V 3k

PEPE 62789K11K12K142028E1E2E3E439 62789K11K12K142028E1E2E3E439 PE

Setpoint inversion

627RL 627RL

Ctrl. enableCCW/CW rotation Ctrl. enableCW/CCWrotation

87-+ 87-+

++--+- 8278IB ++--+- 8278IB

Master voltageMaster current12...30 Vexternal supply Master voltageMaster current12...30 Vexternal supply

Lenze 97