| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | | | |
| | | Design - 8200 and 9300 vector 9340 supply and feedback modules | | |
| | | |
| | | |
| | | Mains filter A Depending on the application, various line-side measures can be used for mains current reduction and interference suppression on supply and feedback modules. The mains filter described overleaf or the assigned mains choke is required. | | Limiting value class A is often required for industrial networks operating separately from mains supplies in domestic areas. The noise emitted by the connected consumers must not exceed the defined characteristic. In order to meet the requirements of limiting value class A, you can connect a mains filter A before the supply and feedback modules. | | |
| | | |
| | | |
| | | Technical data | | |
| | | |
| | | | | | | | | | | | | | Device | Order ref. | ■r [A] | Mains filter A '-'mains [^1 | Inductance [mH] | m [kg] | | | | 9341 | EZN3A0120H012 | 12.0 | 480 | 1.20 | 4.7 | | | | 9342 | EZN3A0088H024 | 24.0 | 480 | 0.88 | 12.2 | | | | 9343 | EZN3A0055H045 | 45.0 | 480 | 0.55 | 15.0 | | | | | | | | | | | | | |
| | | |
| | | Dimensions of mains filter A | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | Order ref. | Figure | a [mm] | b [mm] | c [mm] | d [mm] | e [mm] | m [mm] | n [mm] | | | | EZN3A0120H012 | A | 135 | 260 | 135 | 245 | 230 | 7.0 | - | | | | EZN3A0088H024 | A | 135 | 380 | 135 | 365 | 230 | 7.0 | - | | | | EZN3A0055H045 | B | a | b | bi | c | d | di | d2 | d3 | d4 | e | m | n | | | | 278 | 710 | 365 | 258 | 670 | 22 | 300 | 38 | 300 | 250 | 11 | 6.5 | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Figure A | | |
| | | |
| | | □□□□□ □□□□□ ©□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ ■□□□□□ □□□□□ □□□□□ ■□□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ ©□□□□ □□□□□ □□□□□ | | □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ | | □□□□ □□□□ □□□© □□□□ □□□□ □□□□ □□□□ □□□□ □□□□ □□□□ □□□□ □□□□ □□□□ □□□□ □□□□ □□□□ □□□□ □□□□ □□□□ □□□□ □□□□ □□□□ □□□□ □□□□ □□□® □□□□ □□□□ | | |
| | | UUUUUL □□□□□E □□□□□E □□□□□E □□□□□E □□□□OC □□□□□E | | |
| | | |
| | | □□□□OC □□□□□E □□□□□C □□□□□E □□□□□C □□□□□E □□□□□E □□□□□E □□□□□E □□□□□E □□□□□E □□□□□C □□□□□E | | |
| | | |
| | | |
| | | Figure B | | |
| | | |
| | | The mains filter has an adapted connection cable and must therefore be connected directly to the supply and feedback unit. | | |
| | | |
| | | Lenze | | |
| | | 90 | | |
| | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |