Design - 8200 and 9300 vector
Mechanical installation
General information
–8200 vector
frequency inverters must only be used asbuilt-in units.–If the exhaust air contains pollutants (dust, lint, grease,aggressive gases) then appropriate counter-measuresmust be in place (e.g. installation of filters, regularcleaning etc.).–Ensure there is enough mounting space.Several units can be mounted directly adjacent to one
another without clearance.Ensure that there is free access for cooling air andthat the outlet for used air is not blocked.
Ensure clearance of 100 mm above and below.–In the event of continuous oscillations or vibrations,check the use of
vibration dampers. The frequency inverters can be fitted as follows into a
control cabinet:With the fixing rails included in the scope of supplyWith a DIN rail mounting up to 3.0 kW With thermal separation from 4.0 kW upwards With special fixing devices
Lenze
43