| | | | |
| | | |
| | | |
| | | |
| | BESTELLBEISPIELE I PART NUMBER EXAMPLES | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | Housing: from page 61 Insulator: from page 61 | - Cable 0: from page 64 - Cable fixing type: from page 64 - Contact: from page 61 | |
| | | |
| | FFA.1Y.405.CLAC32 = straight plug with cable collet, 1Y series, high voltage 5kV, outer shell in chrome plated brass, PEEK insulator, 1 male solder contact, C type collet for a 3,2 mm diameter cable. | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | - Contact: from page 61 - Insulator: from page 61 | |
| | | |
| | ERA.1Y.4u5.CTL = fixed socket, nut fixing, 1Y series, high voltage 5kV, outer shell in chrome plated brass, PTFE insulator, 1 female solder contact. | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | Model Series Housing: from page 61 | | |
| | - Insulator: from page 61 | |
| | | |
| | SWH.1S.405 = straight coupler, nut fixing, 1S series, high voltage firm, outer shell in chrome plated brass, PEEK insulator, 1 female contacts each end. | |
| | | |
| | Note; 11 the ..Variant" position in the reference is used to specify either the presence of a collet nut for fitting the bend relief or the anodized colour of the housing in aluminium alloy. For models with collet nut for fitting the bend relief, a „Z" should be indicated and a bend relief can be ordered separately as indicated in the ..Accessories" section. An order for a connector with bend relief should thus includee two part numbers. For the various housings available in colours, the corres ter in the part number for the colour see Unipole/Multipole catalogue. For the watertight models of socket, the letter „P" is used; for the vacuumtight models of socket the letters „PV" shall be indicated. For the plug and socket that should be filted with an FPM O-ring the letter „H" shall be indicated. 2) Variants see Unipole/Multipole catalogue. | |
| | | |
| | | |
| | | |
| | | | |