Pressure Comparison Pump, hydraulic1000 / 1200 / 1600 bar - 14500 / 17400 / 23200 psi

LSP

Pressure Comparison Pump Series LSP Pressure source for calibration purposes

Operating fluid: hydraulic oil or destilled water

Pressure comparison pumps are used for generating pressure for thetesting, adjusting and calibrating of mechanical and electronic pressure measuring instruments by means of comparison measurements. Thesepressure tests can be carried out in laboratories, workshops or on site at theset measuring point. When the device under test and a reference measuring instrument with anadequate accuracy are connected to the test pump, the same pressure will act onboth measuring instruments after actuating the pump. A calibration or an adjustment can becarried out by comparing the two measured values at any pressure value. In order to enable an accurate generation of the measuring points, the pressure comparison pumps series LSP are provided with a fine adjustable spindle pump. In addition, the series LSP feature a threadedspindle which only runs within the pump body. Thus there is no adverse bending moment acting on anoutstanding spindle, and particularly for field use this has the advantage that the dimension of these pressurecomparison pumps will not change when the spindle is turned during operation. The series LSP needs only little forceto generate also high pressures. 1000 bar14500 psi TypeExecutionPressure generationLSP 1000-EB basic executioncost effective (the optional priming pumpLSP-VP can be mounted, see back side of this sheet) basic execution but with alreadymounted priming pump LSP-VP (more easy handling because no venting necessary)1000 bar14500 psi LSP 1000-EB-VP execution with base plateand with priming pump LSP-VP (more easy handling because no venting necessary)1200 bar17400 psi LSP 1200-DL-VP LSP 1600-DL-VP ditto1600 bar23200 psi

Versions for aggressive media like SKYDROL

or brake fluids also available (Type ...” -S ”) DRUCK & TEMPERATUR Leitenberger GmbH Bahnhofstr. 33 C D-72138 Kirchentellinsfurt C GermanyTel.: 0 71 21 - 9 09 20 - 0 C Fax: 0 71 21 - 9 09 20 - 99E-Mail: DT-Info@Leitenberger.de C http://www.druck-temperatur.de

Technische Änderungen vorbehalten. Freibleibend C (Rel. 080225) • All technical modifications reserved. Without engagement