OPERATING INSTRUCTIONSKVB 01, KVB 01.1

Supplement: UA 50 Directions for use + cooling system adapter list

Vacuum-type cooling system filler

The KVB 01 and KVB 01.1 permit repairedcooling systems to be checked for leaks and refilled free of any air pockets. To connect the KVB 01 to the cooling systemexpansion tank, a radiator adapter with connecting nipple is also required (corresponding to vehicle model - see accompanying list of adap- ters). The KVB 01.1 is supplied complete with a UA 50 universal adapter.
Illustr. 1

Preliminary tasks/requirements

The expansion tank of the cooling system has to be empty. Check the capacity of the cooling system (refer to vehicle user's manual). A sufficient quantity of coolant complying with the specified quality must be available. Compressed air supply at 6-10 bar (87-145 psi). It is advisable to work with a professional container marked with a scale showing coolant level. Set the heating control switch (in the vehicle) to the 'high heat' position.

1. Directions for use

a)The venturi tube (C) is prepared with a 1/4" interior thread. A suitable nipple (3) must be connected.(see illustr. 2)b)Remove radiator cap. Press-fit model-related adapter K.. or screwmount universal adapter UA 50 to the expansion tank filler neck.c)Connect KVB 01 at (E) . (see illustr. 1)d)Take care to ensure that stopcocks
Illustr. 2 V1 and V2 areclosed. (see illustr. 3)
Illustr.3 We reserve the right to introduce technical alterations without noticeD:\GA_GB\KVB_01E.WPD 26/10/01