• Products
  • Catalogues
  • Projects
  • News & Trends
  • Exhibitions

Bulletin 1830 - 8 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

Catalogue excerpts

More Than Just a Motor Company RIGHT-ANGLE AND PARALLEL SHAFT AC & DC GEARMOTORS FRACTIONAL AND SUB-FRACTIONAL HORSEPOWER Bulletin 1830

 Open the catalogue to page 1

GEARMOTORS Your First Source for Off-The-Shelf or Custom Gearmotors PZ Series 10 through 100 inch-pounds of output torque. P1100 Series 70 through 1112 inch-pounds of output torque. Right-Angle 10 & 13 Series 5 through 135 inch-pounds of output torque. PE350 Series 25 through 371 inch-pounds of output torque. P240 & P300 Series 27 through 391 inch-pounds of output torque.

 Open the catalogue to page 2

Gearmotors for Any Application Parallel Shaft AC and DC Gearmotors Parallel shaft gearmotors are available from stock in both AC and DC designs. All LEESON parallel shaft gearmotors are designed for reliability and long life. Models ranging from 10 through 1100 inch-pounds are available off-the-shelf, from one of LEESON’s 35 warehouses. All LEESON parallel shaft gearmotors are interchangeable with major brands of gearmotors. Right-Angle AC and DC Gearmotors LEESON right-angle gearmotors are rugged and adaptable to meet the needs of industrial applications. For example, all right-angle gearmotors...

 Open the catalogue to page 3

STOCK SUB-FHP IP55 WASHGUARD GEARMOTORS P300 Series Gearmotors I Gearbox output shafts are coated with Mirolon 3300 fortified Teflon for superior corrosion resistance. I Precision machined in-line steel gears with a first stage steel helical gear followed by spur-type gears. I Lubrication is permanent semi-fluid grease, reducing possibility of leakage. I Output shafts have needle bearings for high load capacities. I Gearbox output shafts are coated with Mirolon 3300 fortified Teflon for superior corrosion resistance. I Precision machined in-line steel gears with a first stage steel helical gear...

 Open the catalogue to page 4

NEW! STOCK AC & DC GEARMOTORS WASHGUARD SUB-FRACTIONAL DC GEARMOTORS Enhanced Performance in Wet and Humid Areas These new units are designed and manufactured to provide enhanced performance in wet and humid areas. This product offering is a perfect addition to LEESON’s market-leading WASHGUARD motors, known to “shed water like a duck.” Both the motors and gearmotors meet IP55 environmental conditions. The gearmotor styles include both parallel and right-angle output shaft configurations. The parallel units have ratio options from 5:1 up to 336:1 with full load torque ratings exceeding 300 in-lbs....

 Open the catalogue to page 5

NEW! STOCK SUB-FHP THREE PHASE INVERTER RATED GEARMOTORS Superior Protection Against Voltage Spikes Sub-FHP AC Gearmotors Inverter Rated Design Specifications Three phase motors totally enclosed for continuous duty, general purpose applications. Standard on all these ratings is the exclusive Inverter Rated Insulation System (IRIS). This provides superior protection against voltage spikes induced by variable frequency drives. Many superior mechanical features for both the motor and gearbox. Double shielded ball bearings in the motor. Needle bearings in the parallel shaft gearboxes and ball bearings...

 Open the catalogue to page 6

NEW! SPECIAL PURPOSE STOCK DC GEARMOTORS Gearmotors for Special Applications OS300 Series Gearmotors Off-Set Shaft Electrical Specifications – SCR Rated Gearmotors Totally enclosed, permanent magnet DC gearmotors, performance matched for continuous duty service over a 60:1 speed range. All have constant torque throughout the range when powered by a full-wave unfiltered SCR-type adjustable speed control having a typical form factor of 1.3 to 1.4. Low Voltage Gearmotors Totally enclosed, permanent magnet DC gearmotors, performance matched for continuous duty. Motors are designed for battery power...

 Open the catalogue to page 7

ACCESSORIES Sub-FHP Gearmotor Right-Angle Base Kit Sub-FHP Gearmotor Conduit Boxes This Optional Base Kit can be used with the 10 Series right-angle gearmotors. (Includes screws for mounting to gearbox, but not the application.) Optional steel conduit or junction boxes are available. The boxes are painted and mount in holes using screws provided with all stock gearmotors. Catalog Number For Motor Frames DIMENSIONS (Inches) B C K A M1760000* 25 2.09 2.45 2.23 0.875 M1760021* M1760007 30/31 34 3.13 3.13 2.63 2.63 2.28 2.28 0.875 0.875 M1760012 38 4.75 2.75 2.00 1.125 175893 42 4.75 2.75 2.00 1.125...

 Open the catalogue to page 8

All LEESON Electric catalogues and technical brochures

  1. EPACT Supplement

    56 Pages

    En
  2. Bulletin 1400

    8 Pages

    En
  3. Bulletin 1600IEC

    36 Pages

    En
  4. Bulletin 1700

    5 Pages

    En
  5. Fire Pump Motors

    9 Pages

    En
  6. Bulletin 7052

    8 Pages

    En
  7. Bulletin 1055

    8 Pages

    En
  8. parts Catalog

    61 Pages

    En
  9. Basic Training

    95 Pages

    En