ULTRA-MINIATURE LATCHING 2-PORT HIGH DENSITY INTERFACE (HDI) SOLENOID VALVE
2Pages

{{requestButtons}}

Catalog excerpts

ULTRA-MINIATURE LATCHING 2-PORT HIGH DENSITY INTERFACE (HDI) SOLENOID VALVE - 1

ULTRA-MINIATURE LATCHING 2-PORT HIGH DENSITY INTERFACE (HDI) SOLENOID VALVE The Lee Company’s ultra-miniature 2-port solenoid valve is now available in a magnetically latched design and joins Lee's LHL Series of valves under the HDI platform. Optimized for applications that demand ultra-low power, low heat and small size, this magnetically latched solenoid valve is ideal for compact, battery powered devices such as portable respiratory care instruments, breath analyzers, environmental monitors and molecular diagnostic instruments. The valve requires only momentary (10 msec minimum) pulses of current to switch its state resulting in 23 millijoules consumed per switch. The polarity of voltage on the terminal pins controls the switched position. The Lee Company offers a wide range of standard manifolds for testing as well as custom designed manifold configurations for production. Performance parameters can be optimized for specific applications. For additional information and technical assistance, please visit our website to contact a local Lee Sales Engineer. ■ Magnetically latched ■ Ultra-low power and low heat: 23 mJ/switch ■ ■ ■ ■ ■ ■ Low internal volume Operating pressure range: Vac-45 psig (0-10 psid) Leakage: less than 50 SpLPM at 10 psid air, 70°F (21°C) Wetted materials: housing (PBT), armature/core (FeCr alloy), spring (316 SS), O-Ring (FKM) and epoxy. See table below for seal and plunger head wetted materials. NOTES: (1) Other voltages available upon request. (2) The Lohm is a measure of flow resistance. Additional information can be found at www.theleeco.com. SWITCHING TABLE The valve will switch to, and remain in the state indicated when a 10 to 30 ms electrical pulse is applied with the rated voltage and polarity. Et^i= LATCHING SOLENOID VALVE SYMBOL See dimensional drawings on reverse. THE LEE COMPANY 2 Pettipaug Road, PO Box 424, Westbrook, Connecticut 06498-0424 Tel: 860-399-6281 • www.theleeco.com

Open the catalog to page 1
ULTRA-MINIATURE LATCHING 2-PORT HIGH DENSITY INTERFACE (HDI) SOLENOID VALVE - 2

LATCHING 2-PORT SOLENOID VALVE PLUG-IN MOUNTING HARDWARE SOLD SEPARATELY* PORT SEAL GASKET INCLUDED PORT A, INLET 2X #2-56 MOUNTING SCREW LOCATION * MOUNTING SCREW (LHWX0213420A) SCREW SUPPORT (LHDX0307140A) PLUG-IN BOSS DETAIL FACE MOUNT BOSS DETAIL 0 0.00 VALVE FLANGE DATUM SURFACE .253 6.41 MIN SEALING AREA Boss geometries and dimensions shown above are for reference only. All dimensions are in inches [mm]. Plug-In Boss geometry may be created using Lee cutting tool Part Number TTTA0000250B. Reference Drawing Number LCFX0300250B for complete Plug-In Boss specifi cations and Drawing Number...

Open the catalog to page 2

All THE LEE COMPANY catalogs and technical brochures

  1. LEE PLUG JET

    2 Pages

  2. LEE VILA

    2 Pages

  3. LEE 250 PRI

    2 Pages

  4. LEE 5K JEVA

    2 Pages

  5. 375 HD PRI

    2 Pages

  6. HDI Brochure

    4 Pages

Archived catalogs