Breath of fresh air with Lapp. Quality and innovation from a single source - LAPP GROUP - (Version JPG) - Page n° 49 - PDF Catalogue | Technical Documentation

See other catalogues for LAPP GROUP

Wiring harness, Connector, Cable cutter, Software, Cable feedthrough

Text version of the page

Harsh use conditions

Increased mechanical and chemical resistance

OLFLEX® 491 P

PVC insulated, numbered, PUR sheath, approved

LAPP KAOet STUrtMirr ¡H.R.EX iílP RLÍ i*« CM ti

■ Benefits

• Low adhesive surface

• Flame retardant in accordance with UL/CSA FT1 and IEC 60332.1-2

■ Technical data

Protected against water and dirt Wear-resistant

Core identification code

Black with white numbers acc. to VDE 0293 Approvals

In accordance with UL-AWM Style 20234 cUL AWM II A/B FT1 Specific insulation resistance > 20 GOhm x cm Conductor stranding Fine wire according to VDE 0295 Class 5/ IEC 60228 Class 5 Minimum bending radius For flexible applications: 15 x D For fixed installation: 4 X D Rated voltage

In accordance with HAR U0: 300/500 V UL + CSA U: 600 V Test voltage Test voltage: 4000 V Protective conductor G = with protective conductor GN/YE X = without protective conductor Range of temperature For flexible applications: -5°C up to 80°C For fixed installation: -40°C to 80°C

Approvals (Norm references)

■ Application range

RÖHS7

• Devices

• Appliances

• Especially in wet area of machine tools and transfer lines under normal mechanical stress.

• Outdoor use only in accordance with the indicated temperature range

■ Product features

• Increased oil resistance

• Abrasion and cut resistant

• USA: Acc. NFPA79 Ed 08 in industrial machinery as part of a listed assembly only.

■ Design

• Fine strands of bare copper wires

• PVC insulation LAPP P8/1

• Special polyurethane sheath (PUR)

• DESINA* conformant, black (RAL 9005)

• Silver grey (RAL 7001)


Part number Number of cores and mm² per conductor		AWG	Outer diameter in mm approx.	Copper index kg/km	Weight kg/km approx.

0013009 3 G 1		18	7.7	27.0	73
0013017 3 G 1.5		16	8.3	44.0	100
0013018 4 G 1.5		16	9.0	58.0	123
0013019	5 G 1.5	16	9.8	72.0	150
0013020	7 G 1.5	16	10.7	101.0	197
0013021	12 G 1.5	16	13.8	173.4	344
0013023	25 G 1.5	16	20.0	360.0	682
0013024	3 G 2.5	14	9.2	72.0	152
0013025	4 G 2.5	14	9.9	96.0	200
0013208	2 X 1	18	7.3	19.2	62
0013210	4 G 1	18	8.2	35.0	89
0013212	7 G 1	18	9.7	61.0	138
0013213	12 G 1	18	12.5	105.0	232
0013214 18 G 1		18	14.8	157.0	340
0013215 25 G 1		18	17.8	218.0	454
0013223	3 G 1.5	16	8.3	44.0	100
0013220	4 G 1.5	16	9.0	57.6	123
0013222	7 G 1.5	16	10.7	101.0	197
0013225	12 G 1.5	16	13.8	173.0	344
0013226	18 G 1.5	16	16.6	260.0	488
0013227	25 G 1.5	16	20.0	360.0	682

Copper price basis: EUR 150 / 100 kg

Please find our standard lengths at: www.lappkabel.de/en/cable-standardlengths Packaging size: Coil < 30 kg and < 250 m, otherwise drum

Please specify the desired packaging size (e.g. 1 x 500 m drum or 5 x 100 m coils)

DESINA® is a registered trademark of the Association of German Machine Tool Manufacturers

■ Comparable products_

• ÖLFLEX* CLASSIC 400 P see page 44

• ÖLFLEX* FD 891 P

■ Accessories

• SKINTOP* ST-M see page 107

• Cable Marking Products

Breath of fresh air with Lapp. Quality and innovation from a single source - LAPP GROUP - #49

Wiring harness, Connector, Cable cutter, Software, Cable feedthrough