Lapmaster 24" Open Face Machine - Lapmaster International - #1

Text version of the page

STANDARD FEATURES • Heavy duty floor standing base with integrally mounted drive motor, reduction gearbox. • Heavy duty work table, vertically adjustable. • Three conditioning rings, with adjustable, Zytel roller bearing yoke assemblies to maintain lap flatness. • Free standing abrasive system complete with pump and multiple point compound distribution. • High torque drive unit consisting of 1.5kW motor and reduction gearbox. Lap plate speed 70 rpm. • Operator controls at 110V, complies with EN 60 204. • CE compliant. • Operator panel with start / stop controls, and multiple range digital process timer. • Waste tank. The Lapmaster Model 24 is the smallest floor standing lapping machine in the range and is ideal for engineering workshops, where flatness and finish are of prime importance. It is equipped with a 610mm diameter serrated lap plate, manufactured from Grade 300 grey cast iron to ISO 185(2005) as standard. Other plates can be supplied on request. The machine is self contained and the rigid welded tubular section steel frame supports the reduction gearbox and drive motor and houses the abrasive compound system and the waste tank. Access to these is provided by lift off panels. The machine is intended for use with free abrasive compounds. A dispensing system, for use with water and diamond compounds etc., can also be fitted. Flatness of the machines lap plate, and consequently of the component, is controlled by adjusting the position of the conditioning rings relative to the lap plate track. The lapping plate drive system uses a separate motor and worm & wheel mechanical reduction gearbox with single belt drive. The Lapmaster model 24 can be used to process a wide variety of materials including semiconductors, electro optics, ceramics, metals and many other specialty products. This floor standing machine is also available in a pneumatic lift version. Please see appropriate datasheet, available on request. STANDARD TOOLING • High density, cast iron serrated lap plate. 610mm O.D. x 114mm I.D. • Three high density cast iron serrated conditioning rings. 286mm O.D. x 248mm I.D. • Three pressure weights. • Three blank workholder discs. • Three felt pads. • Lap plate lifting tool. • Operation and maintenance manual. International Lapping and Polishing Machine Systems www.lapmaster.co.uk