LPES-2208CA - Lantech Communications Europe GmbH - #1

Text version of the page

www.lantechcom.eu | info@lantechcom.eu POE Series Datasheet Version 1.0 1 LPES-2208CA 8 10/100TX + 2 100M/Giga SFP Combo Managed Switch w/ 8 PoE Injectors & Pro-Ring System ƒÞ Pro-Ring covers X-Ring, Couple Ring, and Dual Homing Topology ƒÞ X-Ring provides recovery time < 10ms up to 250 units in one Ring ƒÞ Fully complies with IEEE802.3af PoE standard OVERVIEW Lantech LPES-2208CA is a 8-Port 10/100TX built in 8 PoE Injectors + 2-Port 10/100/1000T / Dual Speed SFP combo Managed Switch with SNMP and “X-Ring” Self-Heal Recovery functionality. The SNMP features are including QoS for 4 queues, 801.q VLAN, IGMP snooping and query mode as well as SNTP and SMTP. Lantech LPES-2208CA supports Pro-Ring, fast network recovery scheme in less than 10ms. Couple Ring is to ensure network recovery protection between two Pro-Ring groups. Dual homing is to back up the Pro-Ring groups when connect to upper layer or core switch. LPES-2208CA supports 48V input power and fully complies with IEEE802.3af feeding power up to 15.4W per port up to 8 ports via twisted pair cable. Lantech-View is free bundle with LPES-2208CA, in which it monitors and configures multiple Lantech industrial switches up to 10. Optional Lantech-View Pro can map up to 1000 nodes with auto-layout, configuration and discovery. Lantech LPES-2208CA is the best switch to use in Surveillance, Traffic Management, Automation, Airport, Wireless backhaul etc where PoE function and SNMP are required. FEATURES & BENEFITS ƒÞ PoE Management „Q PoE Enable/Disable, Power limit by classification, Power limit by management, Power feeding priority, Detect Legacy Signature ƒÞ Lantech-View, Windows-based Utility for multiple switch monitoring & configuration „Q Supports up to 10 switches version for free ƒÞ Pro-Ring System „Q Covers X-Ring, Dual Homing, Couple Ring Topology „Q X-Ring provides redundant backup and recovery time below 10ms for a ring of up to 250 switches ƒÞ Port Based, Tag Based VLAN, GVRP ƒÞ Port Trunk with LACP ƒÞ QoS (Quality of Service) „Q Per port provides 4 priority queues „Q Port Base, Tag Base and Type of Service Priority ƒÞ Port Mirror: Monitor traffic in switched networks. ƒÞ Security „Q Port Security: MAC address entries/filter „Q IP Security: IP address security management to prevent unauthorized intruder. „Q Login Security: IEEE802.1X/RADIUS ƒÞ IGMP „Q Query mode for Multi Media Application „Q Support multicast filter ƒÞ IEEE802.1d Spanning Tree;IEEE802.1w RSTP ƒÞ Support 802.1ab LLDP ƒÞ Bandwidth Control ƒÞ System Event Log ƒÞ SNMP Trap & Email Alert for events „Q Device cold start, Power status, Authentication failure, Pro-Ring topology changed, Port Link up / Link down SPECIFICATION Hardware Specification Switch Architecture Back-plane (Switching Fabric): 5.6Gbps Packet throughput ability (Full-Duplex): 2.38Mpps @64bytes Transfer Rate 14,880pps for Ethernet port 148,800pps for Fast Ethernet port Mac Address 8K MAC address table Connector 10/100TX: 8 x RJ-45 with auto MDI/MDI-X function 10/100/1000T/ Mini-GBIC Combo: 2 x RJ-45 + 2 x 100/1000 SFP sockets RS-232 connector: DB-9 Network Cable 10Base-T: 2-pair UTP/STP Cat. 3, 4, 5/ 5E cable EIA/TIA-568 100-ohm (100m) 100Base-TX: 2-pair UTP/STP Cat. 5/ 5E cable EIA/TIA-568 100-ohm (100m) 1000Base-TX: 2-pair UTP/STP Cat. 5/ 5E cable EIA/TIA-568 100-ohm (100m) Optical Cable Distance: Multi mode: 0 to 5 km, 1300 nm (50/125 ìm, 800 MHz*km) 0 to 4 km, 1300 nm (62.5/125 ìm, 500 MHz*km) Single mode: 0 to 40 km, 1310 nm (9/125 ìm, 3.5 PS/(nm*km)) 0 to 80 km, 1550 nm (9/125 ìm, 19 PS/(nm*km)) Min. TX Output: