You may also be interested in
Text version of the page
Industrial Managed Switches
Datasheet Version 1.0
www.lantechcom.eu | info@lantechcom.eu
1
IES-2307C
7-Port 10/100TX + 3-Port 10/100/1000T with 100/1000M
SFP Combo Industrial Managed Switch with DIDO
Supports DIDO (Digital input / output) function
X-Ring provides Ring recovery time of less than 10ms
Wide operating temperature range from -40°C to 75°C (-E model)
UL Class I Division II for Group A,B,C and D
OVERVIEW
The Lantech IES-2307C is a 7-Port 10/100Base-TX + 3
10/100/1000T with 100/1000 SFP Combo Industrial Switch with
SNMP functionality. The SNMP features are including QoS for 4
queues, 801.q VLAN, IGMP snooping and query mode as well
as SNTP and SMTP.
The IES-2307C supports Pro-Ring system, which covers X-Ring,
Couple Ring, Dual Homing and Dual Ring. X-Ring provides a
recovery time of less than 10ms for a ring of up to 250 switches.
Couple Ring ensures network recovery protection between two
X-Ring groups. Dual homing is to back up the X-Ring groups
when connect to upper layer or core switch. It also supports
Dual Ring, which can connect two rings without setting couple
ports.
The IES-2307C DIDO function can support additional
open/close physical contact for designate applications besides
Port / Power events, for example, DIDO function can trigger
alarm if the switch was moved or stolen. In case of events, the
IES-2307C will immediately send an email to pre-defined
addresses as well as SNMP Traps out. It provides 2DI and 2DO
while disconnection of the specific port was detected; DO will
activate the signal LED to alarm. DI can integrate the sensors
into the auto alarm system and transfer the alarm information to
IP network with email and SNMP.
Lantech-View is free bundle for 10 node version, in which it
monitors and configures multiple Lantech industrial switches.
Optional Lantech-View Pro can map up to unlimited user with
auto-layout, configuration and discovery.
The IES-2307C is designed to meet with critical network
environment with IP 30 enclosure and test under extensive
Industrial EMI and Safety standards. With UL Class I Division II
approval, the IES-2307C can be implemented in hazardous or
explosive condition without accelerating the damage. It’s the
best choice for inflammable environment where the liquid, gas
and vapor etc might present the hazardous condition which
generally to be find in mining, oil & gas, chemical, processing
automation areas. It’s also suitable for surveillance, factory
automation, transportation, telecom / ISP outside terminal,
heavy industrial factory and other factory assembly lines.
FEATURES & BENEFITS
2DI (Digital input) & 2DO (Digital output) function
Pro-Ring
X-Ring, Dual Homing, Couple Ring, and Dual Ring
Redundant backup feature and the recovery time less
than 10ms for a ring of up to 250 switches*
Wide Operating Temperature (-40°C ~75°C) for -E mod el
Port Trunk with LACP
QoS, CoS supported
Security
Port Security: MAC address entries/filter
10 IP address security management to prevent
unauthorized intruder
Login Security: IEEE802.1X/RADIUS
IGMP Snooping & Query for Multi Media Applications
Supports Spanning Tree & RSTP
Support 802.1ab LLDP
UL Class I Division II Group A,B,C, D hazardous location
Bandwidth Control
Ingress Packet Filter and Egress Rate Limit
Broadcast/Multicast Packet Filter Control
System Event Log
System Log Server/Client
SMTP e-mail Alert
Relay Alarm Output System Events
SNMP Trap
Device cold start, Power status, Authentication failure,
X-Ring topology changed, Port Link up/Link down, DIDO
open/close
3000VDC EFT & 6000VDC ESD protection
Lantech-View, Windows-based Utility
Lantech-View 10 node version free bundle
LANTECH-View Pro up to unlimited user
