Lifting bottom centrifuge - Lanner Anlagenbau - #1

/ 1


catalogue search
Lifting bottom centrifuge - Lanner Anlagenbau
P. 01
Page:
Lifting bottom centrifuge - Lanner Anlagenbau


See other catalogues for Lanner Anlagenbau
You may also be interested in

Sieve, Hydraulic press, Shredder, Oil filtration, Drag conveyor


Text version of the page
Lifting bottom centrifuge
>> Advantages
> Continuous operation
> Long service life
> Highly wear-resistant execution
> Vibration-proof set-up
> Best possible degree of dryness
> Fully automatic and continuous operation
> Compact design
> Very low maintenance costs
> Particularly easy to maintain
> Self-cleaning
Functional principle
In the fully automatic operation the wet chips or the sludge fall over the infeed hopper into the drum of the lifting bottom centrifuge. At this point the chips meet the rotating lifting bottom and are pressed against the drum wall under high centrifugal forces. The hydrau-lically activated lifting bottom moves the chips and/or the sludge upwards to the slot sieve where the liquids are separated from the chips. After a few lifting cycles the dried chips are carried over the edge of drum and quit the centrifuge into the container or discharge con­veyor. The centrifuged liquid can be returned to the production or pumped back for further treatment.
Type
Steel / Stainless steel
Th Brass
roughput* [k Grey cast iron
g/h]
Aluminium
Grinding sludge
A
Dime B
nsions C 0
[mm] D 0
E 0
Capacity [kW]
Weight
[kg]
DS32
375
280
560
125
250
1.330
1.030
850
400
300
2,2
450
DS40
750
560
1.125
250
500
1.540
1.100
950
500
350
2,2
750
DS50
1.500
1.120
2.250
500
1.000
1.740
1.160
1.060
550
400
3,5
950
DS60
3.000
2.240
4.500
1.000
2.000
2.020
1.320
1.230
600
450
2,2
1.750
DS80
6.000
4.480
9.000
2.000
4.000
2.280
1.520
1.500
700
600
7,5
2.600
DS100
10.000
5.960
15.000
3.000
8.000
2.950
1.800
1.960
1.000
700
15
5.600
* Throughput depending on kind of material an coolant
LMNER?
The Specialist for chip processing

pageCatalog pdf di En 2012-05-22-30