Catalogs >
AMETEK Land >
Calibration Furnaces

Calibration Furnaces
8Pages

Add to favorites

Catalog excerpts

CALIBRATION SOURCES

Open the catalog to page 1

LANDCAL Blackbody Temperature Calibration Sources ... extending the calibration route. Primary Standard Sources P 1600B2 - the calibration of a primary source is traceable directly to National Standards via a certified probe installed in the radiation cavity. Reference Standard Sources R 1200P - traceability to National Standards can be achieved either by using optional certified radiation thermometers and adopting the calibration by comparison method, or by purchasing the source complete with a calibration certificate. Portable e.g. P550 P - these sources are comparatively small and light,...

Open the catalog to page 2

The LANDCAL P1600B2 is a new high stability, bench mounted primary temperature source designed for testing and precise calibration of most industrial infrared radiation thermometers at temperatures up to 1600°C/2900°F. The isothermal enclosure provides a highly stable, uniform temperature along the length of the cavity, which is suitable for the calibration of thermographic instruments and also the calibration of thermocouples by the comparison method. The large diameter, conical ended, blackbody cavity is heated by six robust silicon carbide heating elements equally spaced around the...

Open the catalog to page 3

The LANDCAL R1200P is a high stability, blackbody, reference source designed for calibration of infrared radiation thermometers at temperatures up to 1200°C/2200°F. It is completely portable and self-contained, with built-in 3-term controller and separate digital temperature indicator, giving ±1°C/2°F resolution. The R1200P can be used for both on-site or in-laboratory calibration of LAND fixed system and Fibroptic short wavelength radiation thermometers. A calibration certificate can also be supplied as an optional extra where traceability is required. An angle bracket is mounted on the...

Open the catalog to page 4

The LANDCAL P80P is a portable, blackbody, primary source. It is designed for high precision calibration of low temperature infrared radiation thermometers with sub-zero measurement capability, over the range -10 to 80°C/15 to 175°F. When traceability to National Standards is required, the output from the thermometer under test is compared with the source temperature measured by a Platinum resistance thermometer, supplied with a traceable calibration certificate. The source can also be used without a Platinum resistance thermometer if traceability is unnecessary. The P80P provides a wide...

Open the catalog to page 5

OPTIONAL EXTRAS AND ORDERING INFORMATION LANDCAL P1600B2 Power requirement: 220/240V 415/240V (3 phase) 380/220V (3 phase) Optical bench assembly: 915.0mm/36.0in Thermocouple assembly with calibration certificate: Type R Type S Type B LANDCAL P1200B Power requirement: 110/120V 220/240V Optical bench assembly: 915.0mm/36.0in Thermocouple assembly with calibration certificate: Type R Type S Type B LANDCAL R1200P Power requirement: Calibration certificate: 115/230V, selectable 400-1100°C/ 750-2010°F ±3K/6°F Thermometer holder assemblies System 4 standard body and Fibroptic: System 3 standard...

Open the catalog to page 6

PRODUCT PORTFOLIO Land Instruments International design and manufacture an extensive range of on-line thermometers, linescanners and thermal imagers for continuous temperature measurement and process monitoring, and portable thermal imagers for condition monitoring purposes. A comprehensive range of temperature calibration sources is also available. FIXED ON-LINE TEMPERATURE MEASUREMENT SYSTEMS Land’s range of on-line temperature measurement systems combine high accuracy, continuous temperature measurement with long term reliability. Your requirements for a fixed system, which precisely...

Open the catalog to page 7

Non-Contact Temperature Measurement Solutions Land Instruments International Ltd • Dronfield S18 1DJ • England AMETEK Land, Inc. • 150 Freeport Rd. • Pittsburgh, PA 15238 • U.S.A.Tel: +1 (412) 826 4444 Email: irsales@ametek.com • www.ametek-land.com For complete details of all Land offices and distributors please visit our websites. MANAGEMENT SYSTEM Copyright © 2009 Land Instruments Internationa Continuous product development may make it necessary to change these details without notice.

Open the catalog to page 8

Calibration Furnaces 8Pages

Catalog excerpts

All AMETEK Land catalogs and technical brochures

Calibration Furnaces
8Pages