Lambert Intensifier II25 - Lambert Instruments - #2

/ 2


catalogue search
P. 01
P. 02
Pages:


See other catalogues for Lambert Instruments

Text version of the page
Quick Reference Data
Intensifier
Number of stages
1st stage image intensifier
2nd stage image intensifier
Input window
Index of refraction
Input window thickness (mm)
Input diameter (mm)
Available Photocathodes
Phosphor
decay time to 10% (us) Output window Photon gain
Resolution on output (Ip/mm) Output diameter Gate time
Gate propagation delay Gate pulse frequency (kHz) Frame rate (fps) Gain control Power
Optics
Lens mount at input Field of View Relay lens magnification Lens mount to camera
25mm Hybrid
2 (single stage version on request) Gen2 or Gen3
Geni with high output brightness
AVG Glass / Quartz
1.47
6.0
25
S20, broadband, Super S25
GaAs and GaAsP
P46 (P43 and P20 on request)
0.2-0.4 (for P46)
Glass
20,000 30
25mm 40ns - oo < 80ns DC -100kHz 100.000
Manual or optional digital interface 12 VDC
Photocathodes
225
GaAsP
/
\
/
f
\
/
/
1
GaAs
N
/
t
/
r
Super
S25
S20
K^roadb;
ind
7
\
^1
J
_
200
Q.E.=25%
175
150
125
100
"35
I/I
75
Q.E.=10
50
25
0
200 300
400 500 600 wavelength (nm)
700 800 900
Nikon F-mount 25 mm diagonal
25/11 (25/25 on request)
C-mount (F-mount for 25/25 relay lens)
Dimensions
Optional: Low Jitter Digital Interface / power supply (II25D)
With this interface gain and gating of the Lambert Intensifier II25 can be controlled by software. The unit also supplies the DC voltages for the image intensifier and the gating electronics. When connecting a trigger output signal from an attached high-speed camera (e.g. EXP, Strobe or Shutter out) to the interface gating is synchronised with the exposure period and frame rate of the camera. The interface also provides 3 additional, independently programmable output channels that are synchronised with gating. A supplied windows program controls the settings.
PC
Gain control Trigger input
Outputs
Delay range Pulse width range Insertion Delay: Jitter
Interface to PC Control Input power
: Digital in 256 steps
: Programmable termination, hi-Z or 50 ohms. Programmable trigger level (+0.25 to +3.3 volts) and slope. Programmable divisor (1 to 232)
: 4 pulse outputs (incl. one for gating), each programmable for delay, width and polarity.
: 0 to 10 seconds, 10ps resolution
: 5ns to 10 seconds, 10ps resolution
: 25ns
: <100ps RMS, trigger input to any output or between outputs.
High speed camera
Synchronisation signal e.g. EXE STROBE
: Via RS-232 (optional USB or Ethernet)
Power & gain control
: Via Windows control program or ASCII commands : 100VAC-230VAC, 50-60Hz
RS232
[optional USB)
Lambert Digital Interface
l I M Q T
RUMENTS
PERFECTION IN IMAGE DETECTION
Oosteinde 16, 9301ZP Roden, The Netherlands, Tel: +31 50 501 8461, Fax +31 50 501 0034 E-mail: info@lambert-instruments.com, Web: http://www.lambert-instruments.com
rev. 11-2008

pageCatalog pdf di En 2012-05-22-30