LBA 12 AVB (Heavy duty Steel arm - anti-ramming vehicle) - 2 Pages

  1. P. 1

  2. P. 2

Catalogue excerpts

INDUSTRIAL REINforced protection Hea vy duty Steel arm “ nti-ramming vehicle” a • Variable speed, programmable from 7 to 15 sec. • Three-phase motor, power supply 230 V • Adjustable rate of acceleration and braking • Arm + high resistant support reinforced by support posts of 300 kg Specifications Technical feature Steel sheet 4 mm protected by galvanization with blue RAL 5015 paint, door equipped with lock « Ronis 405 ». Steel sheet 3 mm protected by galvanization, with blue RAL 5015 paint. Polyester powder baked at 250°, housing and cover RAL 5015. Half shell: Reinforced steel of 10 mm strenghtened for IPE of 180 x 90 mm. Compression spring ≤ 3800kg + bar, chain and sprocket (replaces the counterweight). Emergency operation: anual operation by 11 turns of the handle and an anti-restarting lock. M Geared motor: T hree-phase 0,55 kw driven by a frequency converter with acceleration and braking ramps and variable speed – power supply mono 230 V and output three-phase motor 230 V. Double wheel converter and worm screw, lubricated for life. Arm Variator proportion Operation time mini/maxi Standard equipment: arrier housing equipped with geared motor and half shell. B Isolating switch, frequency converter, multi-program control unit PL 2024. Anti-condensation thermostatic heating 230 V 32 W. Galvanized and plastified steel arm type IP 180 x 90 mm + reflecting bands class II. Crank for manual emergency operations (with limited switches). A set of keys for the maintenance hatch and a key to adjust the limited switches. Installation, connection, implementation and maintenance manuals. Two supports 200 x 200 with support leg sealed on the ground Optional equipment: Safety magnetic loop - infrared cell – adapted logics – signalling systems etc.

 Open the catalogue to page 1

Optional equipment: LBA 12AVB - Road block Type Maximum passing width Total weight Fixed support post or moving support is compulsory PVC sealed template frame +4 bars 20 X 400 mm. Magnetic support posts 2 x 300 kg. Signage with standard models ø 450, 650, 300 x 1300 m, etc. “High luminosity” LED flashing light, 12 V, ø 180 mm on aluminium pole Motion detector on a magnetic loop, infrared cell etc. Local control equipment : fire brigade access control, push button LBA 12a vb - steel arm «  anti- ramming vehicle From 3 to 5 m – in IPE of 180 x 90 (Number of average cycle without failure) MTBF :...

 Open the catalogue to page 2

All La Barrière Automatique catalogues and technical brochures

  1. LBA 74

    2 Pages

    En