LBA 10 (with high resistance glass fiber arm)
2Pages

{{requestButtons}}

Catalog excerpts

LBA 10 (with high resistance glass fiber arm) - 1

PUBLIC AND RESIDENTIAL INDUSTRIAL W Y BRAKER A HIGH RESIST ANCE GLASS FIBRE ARM • 10 000 cycles / day • Variable speed, programmable from 2 to 9 sec. • Three-phase motor, power supply 230 V • Adjustable rate of acceleration and braking • Installation possible on right or left side • Resistant to gusts of wind of 160 km/h • Protected with cataphoresis Specifications Technical feature Housing and maintenance door : Steel sheet 3 mm protected with cataphoresis, blue paint RAL 5015, door equipped with a Ronis 405 lock. Steel sheet 2 mm protected with cataphoresis, white RAL 9010. Paint: Polyester powder baked at 250°, housing RAL 5015, top cover RAL 9010. Arm: Reinforced glass fibre and polyester arm ø 140 mm with reflecting bands (I or II class). Half shell: Galvanized steel of 8 mm for truncated tube in reinforced glass fibre of ø 140 mm Counterbalance: C ompression spring from 400 to 1 800 kg + bar, chain and sprocket (replaces the counterweight). Emergency operation: anual operation by 11 turns of the handle and an anti-restarting lock. M Geared motor: T hree-phase 0,55 kw driven by a frequency converter powered by a single-phase 230V. Arm Speed trs/mm Variator proportion Standard equipment: ousing with geared motor, counterbalance and a half shell. H Isolating switch, frequency converter, control unit or PLC. Inductive sensors without contact for the arm adjustments. Anti-condensation thermostatic heating 230 V – 32 W. Glass fibre and polyester arm ø 140 mm with reflecting bands class I. Crank for manual emergency operations (with limited switches). A set of keys for the maintenance hatch. Installation, connection, implementation and maintenance manuals. Optional equipment: Safety magnetic loop - infrared cell – adapted logics – signage etc Operation time

Open the catalog to page 1
LBA 10 (with high resistance glass fiber arm) - 2

LBA 86 - reinforced glass fibre arm from 4 to 10 m – ø 140 mm Optional equipment: Maximum passing width PVC sealed template frame +4 bars 16 X 250 mm+8 bolts. Total weight Fixed support post or moving support is compulsory Fixed support post with 230 kg magnetic suction. Ajustable moving support from 900 to 1000 mm + spring with shock Lower folding skirt ø 14 mm of 3 to 6 m on stainless steel screws and (Number of average cycle without failure) junction (P3 Nylon) Polyester paint of special color (RAL to be defined). Signage with standard models ø 450, 650. (Average function time without...

Open the catalog to page 2

All La Barrière Automatique catalogs and technical brochures

  1. FLEX ARM

    1 Pages

  2. LBA 74

    2 Pages