Multi Function Tester - Kyoritsu - #1

The top of the range KEW6015 can perform TEN separate test functions and provides all the test functions generally required to verify the safety of electrical installations in full compliance with IEC61557. The KEW6015 can store test results in its on-board memory for later downloading to a computer or printer. Data can be downloaded via the Infra Red Communication Port(IRDA Port). The KEW6015 is software driven and guides the user through the test functions required making the instrument very easy to use. It's numerous features include the ability to conduct 3 or 4 wire earth resistance tests, D-Lok technology to prevent tripping of most passive type RCD's when loop testing and mains voltage and frequency measurement. ■ Features

•Live circuit and wiring connection check LED's

•D-Lok technology on loop test range

•On-board memory to store test results

•Downloading of data via IRDA port

•Auto power off

•Back lit display

•Polarity switch

•Continuity Auto-null

•Auto ramp and auto test on RCD ranges

•Designed to IP54 Rating

•Complies with IEC61557

KYORITSU

Rated Voltage 230V + 10% - 15% (20/200/2000 O) 400V + 10% - 15% (200/2000 O) Voltage Measuring Range 100-260V 100440V (200/2000 O ,200A) Impedance Range 20/200/2000 Q Nominal Test Current 15mA (200/2000 O ) 3A (20 O) Base Accuracy 20f!range±(3%rdg+8dgt)200f!range±(3%rdg+8dgt) 2000f!range±(3%rdg+8dgt)

Measuring Ranges 20/200/2000 Q Autoranging

Measuring Ranges 20/200/2000 Q Autoranging

Measuring Ranges 20/200Q Autoranging

Open Circuit Voltage > 6V Short Circuit Current > 200mA DC Accuracy ± (1.5%rdg+3dgt)

Open Circuit Voltage > 6V Short Circuit Current > 200mA DC Accuracy ±(1.5%rdg+3dgt)

Open Circuit Voltage > 4V Short Circuit Current > 200mA DC Accracy ± (3%rdg+3dgt)

Measuring Ranges

Measuring Ranges

Measuring Ranges

20/200M Q Autoranging Test Voltages 250V.500V and 1000V DC Output Voltage on Open Circuit 250V+40%-0% 500V+30%-0% 1000V+20%-0% Rated Current > 1 mA Accuracy ± (1.5%rdg+3dgt)

20/200/2000MO Autoranging Test Voltages 250V,500Vand 1000V DC Output Voltage on Open Circuit 250V+20%-0% 500V+20%-0% 1000V+20%-0% Rated Current > 1mA Accuracy 0-100M Q ±(2%rdg + 3dgt) 100M O - 2000M O ±(2%rdg + 4dgt)

20/200MQ Autoranging Test Voltage 500V DC

Output Voltage on Open Circuit 570V DC ± 6% Rated Current > 1mA Accuracy ± (3%rdg+3dgt)

Rated Voltage 230V + 10% - 15% (20/200/2000 A) 400V + 10%-15% (200 A) PSC Ranges 200/2000A/20kA Accuracy

PSC accuracy derived from measured loop impedance specification and measured voltage specification

Rated Voltage 230V AC ± 10%@ 50Hz Voltage Measuring Range 100-250V @ 50Hz Impedance Ranges 20/2000 Q Nominal Test Current 24A (20 O range) 15mA (2000 O range) Accuracy

Rated Voltage 230V AC + 10% - 15%@ 50Hz Voltage Measuring Range 100-250V AC @ 50Hz Impedance Ranges 20/200/2000 Q Nominal Test Current 3A(20nrange),15mA(200nrange),15mA(2000nrange) Accuracy

20 a range ±(3%rdg+4dgt) 200 fi range ±(3%rdg+8dgt) 2000 O range ±(3%rdg+4dgt)

Rated Voltage:230VAC ± 10%@ 50Hz Voltage Measuring Range 100-250V AC @ 50Hz Impedance Range 20/200/2000 Q Nominal Test Current 25A(20 û range) 1.2A(200 fi range) 1.2A(2000 fi range) Test Period 1/2 cycle(10ms)

Base Accuracy 20 O range ±(3%rdg+5dgt)

Rated Voltage 230V + 10% Trip Current Settings

15%

Rated Voltage 230V AC ± 10%@ 50Hz Trip Current Settings RCD X 1/2 : 5,15,50,150,250mA RCD X 1 : 10,30,100,300,500mA

RCD fast :150mA_

Trip Current Duration RCD X 1/2 X 1 : 2000ms

_RCD fast :40ms_

Accuracy

Trip Current ± 3% of test current at 230V Trip time ± (3%rdg+3dgt)

Rated Voltage 230V AC + 10% - 15%@50Hz PSC Ranges 200A.2000A and 20kA Accuracy

PSC accuracy derived from measured loop impedance specification and measured voltage specification

Rated Voltage 230VAC + 10%@ 50 Hz

PSC Range 2000A and 20kA Accuracy

PSC accuracy derived from measured loop impedance specification and measured voltage specification

Trip Current Duration RCD X 1/2.X 1,: XDC: 1000ms RCD X 5,DC (500 and X 1 1000mA):200ms

o

Rated Voltage 230V AC + 10% - 15%@ 50Hz Trip Current Settings RCD X1/2 : 10,30,100,300,500,1000mA RCDX1 :10,30,100,300,500,1000mA RCD X5 : 10,30,100,300mA

(on X 5 range max current 1A) Trip Current Duration RCD X1/2X1 : 2000ms, RCD fast: 50ms Accuracy

Trip current + 10%-0% of test current at 230V Trip time ± (1%rdg+3dgt)

1.0-100.0V

Rated Voltage 230VAC ± 10%@ 50Hz Trip Current Settings RCD X 1/2 : 10,30,100,300,500mA RCD X 1 : 10,30,100,300,500mA RCD X 5 : 10,30,100,300,500mA Trip Current Duration RCD X 1/2 X 1 : 2000ms RCD X 5 : 200ms fast trip 50ms Accuracy

Trip current + 10%-0% of test current at 230V Trip time ± (2%rdg+3dgt)

Safety Standard IEC 61010-1 CAT.Ill 300V

Pollution degree 2 Withstand Voltage 3700V AC for one minute

_Power Source 8 X 1.5V R6P_

Dimensions 186(L) X167(W)X 89(D)mm Weight 980g approx including batteries

Safety Standard IEC 61010-1 CAT. Ill 300V

Pollution degree 2 Withstand Voltage 3700V AC for one minute

_Power Source 8 X1,5V R6P_

Dimensions 175(L)X115(W)X86(D)mm Weight 780g approx including batteries

o

CE Marking:signifies conformance to EMC directive

(89/336/EEC, 92/31/EEC, 93/68/EEC) and Low Voltage directive (73/23/EEC, 93/68/EEC)

Rated Voltage 230V AC + 10% @ 50Hz Fault Current Ranges 2000A and 20kA Nominal Test Current 1,2A (2000A) 25A (20kA) Fault Current Accuracy Fault Current accuracy derived from measured loop impedance specification and measured voltage specification

_Ranges 200 2000 2000O_

Output Voltage 70V peak to peak square wave _Frequency 720Hz ± 5%_

Safety Standard IEC 61010-1 CAT. Ill 300V

Pollution degree 2 Withstand Voltage 3700V AC for one minute Power Source 8 X 1.5V R6P Dimensions 130(L)X183(W)X100(D)mm Weight 1000g approx including batteries

(D

KEW Demonstration Kit is also available from Kyoritsu to help customers with sales promotion and user training. This single unit can be used to give a demonstration of how to use the Insulation/Continuity, Loop and RCD(ELCB) testers. For more datails contact the overseas sales department of KYORITSU.

10ml

Accuracy ■ 5dgt) 200/2000Q (i

20 Q (±2%rdg

CD

Safety Standard IEC 61010-1 CAT. Ill 300V

Pollution degree 2 Withstand Voltage 3700V AC for one minute Power Source 8X1,5V R6 or LR6 Dimensions 105(L) X 210(W) X 240(D)mm Weight 1924g approx including batteries

3^

IModel KSLP5 (Model 7132)

IDurable Holdall & Accessory pouch

7098 Distribution board test leads(1 set)

for Loop/PSC/RCD testing

7099 Moulded plug test leads(1 set)

for Loop and RCD testing at sockets 7025 Lead for insulation and continuity testing 7109 Earth resistance test leads(1 set) KSLP5 external earth probe 8032 auxiliary earth spikes 8210 IrDA Adaptor Durable Holdall Accessory pouch Battery 8 X 1.5V R6 or LR6

Please read the "Safety Warnings" in the instruction manual supplied with the instrument thoroughly and completely for correct use.

Failure to follow the safety rules can cause f re, trouble, electrical shock, etc. Therefore,make sure to operate the instrument on a correct power supply and voltage rating marked on each instrument.

The contents of this catalogue may be subject to change without notice.

No.5-20 Nakane 2-chome,Meguro-ku,Tokyo,152-0031 Japan Phone:81-3-3723-0131 Fax:81-3-3723-0152 URL: http://www.kew-ltd.co.jp E-Mail : info@kew-ltd.co.jp Factories : Uwajima & Ehime

6050

601 OA

6011A

Instruction Manual

03.01 F PRINTED IN JAPAN