Catalogs >
Kyoritsu >
Earth Resistance & Resistivity Tester 4106

Earth Resistance & Resistivity Tester 4106
4Pages

Catalog excerpts

Earth Resistance & Resistivity Tester 4106 - 1

| Quality and reliability is our tradition KYORITSU Earth Rsistance & Resistivity Tester KEW 4106 Earth Rsistance Measurements with 4,3 and 2 Wires Earth Resistivity (p) Measurement using WENNER method i High test current up to 80mA yielding resolution of 0.0010 on 20 range Advanced Filtering method (based on FFT Fast Fourier Transform) reduces noise interference for obtaining stable measurements. Automatic and Manual selection of the Test Current Frequency in four bands (94/105/111/128Hz). In Automatic mode, KEW4106 will select the most suitable Frequency. Several sub-results can be shown on the display: Resistance of the Auxiliary Earth Spikes, Frequency of Test Current, Voltage and Frequency of Interference (noise), Residual Resistance Rk, etc. Warning for excessive noise and high Auxiliary Earth Spikes resistance. Large Graphic Display with backlight for readings in poorly illuminated areas. Up to 800 measurement results can be saved in the memory and recalled on the display. The stored results can be transferred to a PC using the "KEW Report" software and a USB adaptor (Model 8212-USB) which are included. Robust design with IP54 protection. KYORITSU ELECTRICAL INSTRUMENTS WORKS,LTD. http://www.kew-ltd.co.jp

Open the catalog to page 1

Earth Resistance & Resistivity Tester 4106 - 2

Earth Rsistance Measurement i Earth resistance measurement with 4, 3 and 2 wires and six ranges covering measurements from 0.03Q to 200kQ. 镕 Also ideal for large earthing systems by the considerable test current of 80mA(max) yield-ing a high resolution of 0.001 Q on 2Q range. Advanced Filtering method (based on "FFT" Fast Fourier Transform) reduces noise interference for obtaining stable measurements. Օ Warnings for excessive noise and high Auxiliary Earth Spikes resistance. Earth Resistance Measurements with 4, 3 and 2 Wires Earthed Electrode Auxiliary under Test earth spikes Earthed...

Open the catalog to page 2

Earth Resistance & Resistivity Tester 4106 - 3

Earth Resistivity Measurement \ The earth resistivity measurement is use-ful for soil surveys to establish the optimum earth electrode system design and site, to avoid extra cost of re-working electrode inխstallations. It can be also suitable for geo-logical investigations. Earth resistivity measurement is automatically calculated after having set the distance be-tween Auxiliary Earth Spikes (Wenner method). ! Measurement Method for Earth Resistivity (p) [Connection of Auxiliary Earth Spikes and Test Leads] Stick the four Auxiliary Earth Spikes into the ground deeply. They should be...

Open the catalog to page 3