Miniature IS® Pressure Transducer XCL-072 - Kulite - #1

Text version of the page

Untitled table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:6.00pt "Arial", sans-serif; } .font1 { font:7.00pt "Arial", sans-serif; } .font2 { font:8.00pt "Arial", sans-serif; } .font3 { font:9.00pt "Arial", sans-serif; } .font4 { font:27.00pt "Arial", sans-serif; } .font5 { font:5.00pt "Impact", sans-serif; } ^kulite MINIATURE IS® PRESSURE TRANSDUCER XCL-072 SERIES • .075" Diameter • Ideal For Probe Installation • Designed For Both Static and Dynamic Response • Intrinsically Safe Leadless Technology Applications Available (i.e. IS-XCL-072) The XCL-072 design features Kulite's patented leadless technology. This allows for a very rugged package suited for probes, pressure rakes and other similar test set ups. This transducer is well suited for both dynamic and static pressure measurements in benign or harsh environments. .075 (1.9] PRESSURE REFERENCE TUBE .016 O.D. X 1" LONG (.41 X 25.4] FOR PSIG & 1 PSID UNITS B SCREEN STANDARD M SCREEN OPTIONAL 4 LEADS TEFLON INSULATED #36 AWG 12" (305] LONG AFTER COMP. MODULE .375 (9.5) WIRING COLOR DESIGNATION RED + INPUT BLACK - INPUT GREEN + OUTPUT WHITE - OUTPUT 4 LEADS TEFLON INSULATED #36 AWG 24" (610] LONG BEFORE COMP. MODULE NOTE: FOR INTERNAL COMPENSATION CONSULT FACTORY CONSULT FACTORY FOR SPECS. ON SEALED GAGE INPUT Pressure Range 1.7 25 3.5 50 7 100 14 200 21 300 35 500 70 BAR 1000 PSI Operational Mode Absolute, Gage, Sealed Gage, Differential Absolute, Sealed Gage Over Pressure 2 Times Rated Pressure With No Change in Calibration Burst Pressure 3 Times Rated Pressure Pressure Media All Nonconductive, Noncorrosive Liquids or Gases (Most Conductive Liquids and Gases - Please Consult Factory) Rated Electrical Excitation 10 VDC/AC Maximum Electrical Excitation 15 VDC/AC Input Impedance 1000 Ohms (Min.) OUTPUT Output Impedance 1000 Ohms (Nom.) Full Scale Output (FSO) 100 mV (Nom.) Residual Unbalance ± 5 mV (Typ.) Combined Non-Linearity, Hysteresis and Repeatability ± 0.1% FSO BFSL (Typ.), ± 0.5% FSO (Max.) Resolution Infinitesimal Natural Frequency (KHz) (Typ.) 240 300 380 550 575 700 1000 Acceleration Sensitivity % FS/g Perpendicular Transverse 5.0x10-4 6.0x10-5 3.0x10-4 4.0x10-5 1.5x10-4 2.0x10-5 1.1x10-4 1.5x10-5 9.0x10-5 1.0x10-5 6.0x10-5 6.0x10-6 4.0x10-5 4.0x10-6 Insulation Resistance 100 Megohm Min. @ 50 VDC ENVIRONMENTAL Operating Temperature Range -65°F to +250°F (-55°C to +120°C) Compensated Temperature Range +80°F to +180°F (+25°C to +80°C) Any 100°F Range Within The Operating Range on Request Thermal Zero Shift ± 1% FS/100°F (Typ.) Thermal Sensitivity Shift ± 1% /100°F (Typ.) Steady Acceleration and Linear Vibration 1000g Sine PHYSICAL Electrical Connection 4 Leads 36 AWG 36" Long Weight .2 Gram (Nom.) Excluding Module and Leads Pressure Sensing Principle Fully Active Four Arm Wheatstone Bridge Dielectrically Isolated Silicon on Silicon Patented Leadless Technology Note: Custom pressure ranges, accuracies and mechanical configurations available. Dimensions are in inches. Dimensions in parenthesis are in millimeters. Continuous development and retinement of our products may resuit in spécification changes without notice - ail dimensions nominal. (H) KULITE SEMICONDUCTOR PRODUCTS, INC. • One Willow Tree Road • Leonia, New Jersey 07605 • Tel: 201 461-0900 • Fax: 201 461-0990 • http://www.kullte.com