| | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | |
| | | |
| | GENERAL PURPOSE, 5 VDC OUTPUT IS® PRESSURE TRANSDUCERS IPT-1100 SERIES IPTE-1100 SERIES (AMPLIFIED) • High Unamplified Output (IPT-1100) | |
| | | |
| | 5 VDC Output (IPTE-1100) Rugged All Welded Construction High Overload Capabilities Excellent Long Term Stability | • Intrinsically Safe Applications Available (i.e. IS-IPT-1100 or IS-IPTE-1100) <n <a | |
| | | |
| | The ingenious application of modern solid state technology to transducer sensing makes the IPT-1100 Series the most advanced general purpose pressure transducer available. Designed to measure liquid or gas pressure, the transducer is of all-welded stainless steel construction, with integral pressure port and diaphragm. The IPT-1100 provides an extremely rugged, accurate and inexpensive means for pressure-to-voltage conversion. The IPT-1100 Series are ideally suited for a large number of applications in Industry, Process Control, Marine, Automation, Hydraulics and Aerospace. Similar in design to the unamplified IPT-1100 Series, the IPTE-1100 is a 5 volt unit containing a hybrid microelectronic amplifier and regulator within the all welded case. | |
| | | |
| | | | |
| | | |
| | - PRESSURE INLET ORIFICE .031 DIA. (.79) | IPT . . . . 2.750 (70) _ " IPTE . . . 3.150 (80) | |
| | | |
| | VENT HOLE FOR PSIG UNITS ONLY (3 PLACES) | |
| | | |
| | CONSULT FACTORY FOR SPECS. ON SEALED GAGE | | | | 4 COND. #30 AWG SHIELDED CABLE 30" (762) LONG | |
| | | |
| | | |
| | | | | | |
| | | | | | | | | |
| | | |
| | | Absolute, Sealed Gage, Gage | |
| | | |
| | | 2 Times Rated Pressure Range | |
| | | |
| | | 5 Times Rated Pressure Range to Max. of 20000 PSI (1400 BAR) Any Liquid or Gas Compatible With 17-4 PH or 316 SS | |
| | | |
| | | |
| | Rated Electrical Excitation | | | |
| | | |
| | Maximum Electrical Excitation | | | |
| | | |
| | | | | |
| | | |
| | | | | |
| | | |
| | | | | |
| | | |
| | | | |
| | | |
| | | | | | |
| | | |
| | Combined Non-Linearity, Hysteresis and Repeatability | ± 0.1% FSO BFSL (Typ.), ± 0.5% FSO (Max.) | |
| | | |
| | | | |
| | | |
| | | | | | | | | | | |
| | | |
| | | | |
| | | |
| | ENVIRONMENTAL Operating Temperature Range | -65°F to +250°F (-55°C to +120°C) | |
| | | |
| | Compensated Temperature Range | 0°F to +180°F (-18°C to +80°C) Other Ranges Quoted on Request | |
| | | |
| | | | |
| | | |
| | Thermal Sensitivity Shift | | |
| | | |
| | | 50g Peak, Sine 10 to 2000 Hz | |
| | | |
| | | -150 ft. to + 70,000 ft. Will Not Damage Sensor | |
| | | |
| | | | |
| | | |
| | | 100g half Sine Wave 1 msec. Duration | |
| | | |
| | | A. 33656/E4 7/16-20 UNJF-3A | | | |
| | | |
| | | 4 Conductor 30 AWG Shielded Cable 30" (762) Long | |
| | | |
| | | | | |
| | | |
| | Pressure Sensing Principle | Fully Active Four Arm Wheatstone Bridge Dielectrically Isolated Silicon on Silicon 100 Inch-Pounds (Max.) | |
| | | |
| | | |
| | Note: Custom pressure ranges, accuracies and mechanical configurations available. Dimensions are in inches. Dimensions in parenthesis are in millimeters. Continuous development and refinement of our products may result in specification changes without notice - all dimensions nominal. (E) KULITE SEMICONDUCTOR PRODUCTS, INC. • One Willow Tree Road • Leonia, New Jersey 07605 • Tel: 201 461-0900 • Fax: 201 461-0990 • http://www.kulite.com | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | |