KUKA Palletizing Robots - KUKA Roboter - #29

Text version of the page

Issued: 19.07.2010 Version: Spez KR 300 470 PA V3 en 29 / 63 3. Safety 3 Safety 3.1 General 3.1.1 Liability The device described in this document is either an industrial robot or a component thereof. Components of the industrial robot: .. Manipulator .. Robot controller .. Teach pendant .. Connecting cables .. External axes (optional) e.g. linear unit, turn-tilt table, positioner .. Software .. Options, accessories The industrial robot is built using state-of-the-art technology and in accordance with the recognized safety rules. Nevertheless, misuse of the industrial robot may constitute a risk to life and limb or cause damage to the industrial robot and to other material property. The industrial robot may only be used in perfect technical condition in accordance with its intended use and only by safety-conscious persons who are fully aware of the risks involved in its operation. Use of the industrial robot is subject to compliance with this document and with the declaration of incorporation supplied together with the industrial robot. Any functional disorders affecting the safety of the industrial robot must be rectified immediately. Safety information Safety information cannot be held against KUKA Roboter GmbH. Even if all safety instructions are followed, this is not a guarantee that the industrial robot will not cause personal injuries or material damage. No modifications may be carried out to the industrial robot without the authorization of KUKA Roboter GmbH. Additional components (tools, software, etc.), not supplied by KUKA Roboter GmbH, may be integrated into the industrial robot. The user is liable for any damage these components may cause to the industrial robot or to other material property. In addition to the Safety chapter, this document contains further safety instructions. These must also be observed. .. This “Safety” chapter refers to a mechanical component of an industrial robot. .. If the mechanical component is used together with a KUKA robot controller, the “Safety” chapter of the operating instructions or assembly instructions of the robot controller must be used! This contains all the information provided in this “Safety” chapter. It also contains additional safety information relating to the robot controller which must be observed. .. Where this “Safety” chapter uses the term “industrial robot”, this also refers to the individual mechanical component if applicable.