Text version of the page

Rotary Measuring Technology Absolute encoders, Multiturn, optional with incremental track

Multiturn Type 5862 (Shaft) / 5882 (Hollow shaft) SSI or RS 485, programmable

Dimensions haft version: Synchronous flange

10 deep Absolute Encoders * Rmin– securely installed: 55 mm – flexibly installed: 70 mm

Order code shaft version:

8.5862.XXXX.XXXX

Type SSI-Interface* 2001 =4096 x 4096 (24-Bit), Binary Flange 2002 =8192 x 4096 (25-Bit), Binary 1 = Clamping flange 2003 = 4096 x 4096 (24-Bit), Gray 2 = Synchronous flange 2004 = 8192 x 4096 (25-Bit), Gray Shaft (ø x L) RS 485-Interface, half-duplex 1 = ø 6 mm x 10 mm 3001 =ESC protocol, 2 = ø 10 mm x 20 mm max. 19200 baud Interface *This factory set (default) resolution can be re-programmed by using the Ezturn® software. 2 = SSI 5 ... 30 V DC, with 4 status outputs

Accessories:

3 = RS 485, half-duplex 5 ... 30 V DC

Corresponding mating connector to connection type 3 and 4 Order code 8.0000.5012.0000Programming kit Ezturn® includes- Interface converter - Connection cable with the interface converter encoder – PC- 90-250 V AC power supply- CD-ROM with Ezturn® software Order code 8.0010.9000.0004

internal termination 5 = SSI, 5 ... 30 V DC, with incremental tracks A, B A\, B\, 2048 ppr. 7 = RS 485, half duplex 5 ... 30 V DC, external termination 9 = SSI 4.75 … 30 V DC. with 2 status outputs and 2 sensor outputs for monitoring the supply voltage on the encoder. Type of connection 1 = Axial cable (1 m PVC-cable) 2 = Radial cable (1 m PVC-cable) 3 = Axial 12 pin plug 4 = Radial 12 pin plug

Preferred types areindicated in bold

1/2008 www.kuebler.com 151