Valve Position Indicator 02/04 - 20 Pages

Add to MyDirectIndustry favorites
Valve Position Indicator 02/04
  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

  11. P. 20

Catalog excerpts

VOLUMEC > Valve Position Indicator 02/04 VOLUTRONIC > Valve Position Measuring Instrument 0.2 size="-2">

 Open the catalog to page 1

The Valve Position Indicator VOLUMEC is a combination unit with mounting surface for directional control valves NG06 according to ISO 4401-03-02-0-02/DIN 24340-A6. In detail the module consists of a hydraulic manifold,a gear type volume counter and an indicator.Mounted on a connection plate and completed by adirectional control valve the VOLUMEC enables to control hydraulic operating ship armatures for ballast-, cargo- and stripping systems of all kind of tankers. In addition to that the adjusting path of the armature will be measured and displayed.The Valve Position Indicator is suitable for...

 Open the catalog to page 2

Hydraulic manifoldMounting surfaceISO 4401/DIN 24340-A6Direct operated directional valve SW 13 openshut Nut 1.2x2.4 P max = 240 bar Gear typeflow meterwith indicator 5 bar Angled connectorseries 723, 5 pins, waterproof, has to be ordered separately Mounting surfaceISO 4401/DIN 24340-A6 Mounting plate openshut Direct operated directional valve Direct operated directional valve Mounting surfaceISO 4401/DIN 24340-A6 Hydraulic manifold SW 13 openshut Nut 1,2x2,4 P max = 240 bar Gear typeflow meterwith indicator Mounting plate 5 bar Angled connector series 723,5 pins, waterproof, has to beordered separately...

 Open the catalog to page 3

Together with the gear type volume counter the indicator builds the measuring unit. The turning of the gear wheels is transferred via a magnetic drive to the gear box of the indicator. For each application the turndown ratio of the gear box is configurated to geta pointer movement of approx.180. The pointer islimited by two end stops. To reset the indication at each end position a slipping clutch is integrated.The driving shaft of the magnetic drive is equippedwith a small indication to recognize the movement ofthe gear wheels. It can be used as leakage detection. The indicator is completely separated...

 Open the catalog to page 4

KRACHTGmbH ط Gewerbestr.20 58791 Werdohl, Germany ׷ fon +49(0)2392/935-0 fax +49(0)2392/935209 ׷ mail info@kracht.eu web www.kracht.eu 7 >

 Open the catalog to page 7

KRACHTGmbH ׷ Gewerbestr.20 58791 Werdohl, Germany ׷ fon +49(0)2392/935-0 fax +49(0)2392/935209 ׷ mail info@kracht.eu web www.kracht.eu 9 >

 Open the catalog to page 9

10 KRACHTGmbH Gewerbestr.20 ׷ 58791 Werdohl, Germany fon +49(0)2392/935-0 ׷ fax +49(0)2392/935209 mail info@kracht.eu ׷ web www.kracht.eu >

 Open the catalog to page 10

Signal output channel 1 Signal output channel 2 24 volt(brown) Channel 1 (green) Channel 2 (yellow) Number of measuringchannels2Operating voltageU > B = 12...30 V DCpolarizedPulse amplitudeU > b max =0.9 WOutput power/channelP > a max =0.3 Wshort-circuit-proofDegree of protectionIP 65 DIN 40050Status indicatorto blink = all right(2 LED)LED off = failure > out 0.8 U > op Pulse shape withsymm. output signalsquare wavepulse duty factor/channel1:1α15%Signal outputPNP (NPN on request) Pulse offset betweentwo channels90б30Power requirementP > B Arising edgeBone pulse(corr. to flow rateof geom. tooth...

 Open the catalog to page 12

tightenig torque for fixing screws 14 NmO-Ring 10.82 x 1.78 FEP KRACHTGmbH Gewerbestr.20 ׷ 58791 Werdohl, Germany fon +49(0)2392/935-0 ׷ fax +49(0)2392/935209 mail info@kracht.eu ׷ web www.kracht.eu 13 >

 Open the catalog to page 13

The explosion-protected execution passes of theVOLUTRONIC > VOLUTRONIC > ծ Valve Position Measuring Instrumentand switch amplifier are connected electrically with each other. The switch amplifier evaluates the sensor signals of the Valve Position Measuring Instrument and converts them into square-wave signals. > Valve Position Measuring InstrumentVC 0.2 P1 PX-ATEX (own-sure electric equipment) and the switch amplifier K 130 (accompanying electric equipment). To this construction counts the type of protection Δintrinsic safety. > Without switch amplifier the VOLUTRONIC > ValvePosition > The VOLUTRONIC...

 Open the catalog to page 14

Customer Quantity Fluid Viscositymm > 2 ⁄sFlow ratel/min Actuator displacementcm > 3 operating pressurebarSetting of temperaturebarLiquid temperatureCpressure relief valve (by application hydraulic manifold)Environment temperatureаCDistance betweenm Volumec and ValveInner diameter of pipingmmzone, in case of hazardous area Needed outputArmatur VOLUTRONIC > Pulse output type of armaturname of producer indicationsingle acting actuator (spring return)indication +double acting actuatoropen/close(Rack and pinion) switches VOLUMEC indication +double acting actuator r potentiometer(Scotch yoke)indication...

 Open the catalog to page 15

16 KRACHTGmbH Gewerbestr.20 ׷ 58791 Werdohl, Germany fon +49(0)2392/935-0 ׷ fax +49(0)2392/935209 mail info@kracht.eu ׷ web www.kracht.eu >

 Open the catalog to page 16

KRACHTGmbH Gewerbestr.20 ׷ 58791 Werdohl, Germany fon +49(0)2392/935-0 ׷ fax +49(0)2392/935209 mail info@kracht.eu ׷ web www.kracht.eu 17 >

 Open the catalog to page 17

18 KRACHTGmbH Gewerbestr.20 ׷ 58791 Werdohl, Germany fon +49(0)2392/935-0 ׷ fax +49(0)2392/935209 mail info@kracht.eu ׷ web www.kracht.eu >

 Open the catalog to page 18

KRACHTGmbH Gewerbestr.20 ׷ 58791 Werdohl, Germany fon +49(0)2392/935-0 ׷ fax +49(0)2392/935209 mail info@kracht.eu ׷ web www.kracht.eu 19 >

 Open the catalog to page 19

Transfer pumps for lubricating oil supply equipment, low pressure filling and feed systems, dosing and mixing systems. Gear and turbine flow meters and electronics for volume and flow metering technology in hydraulics, processing and laquering technology. > Single and multistage high pressure gear pumps, hydraulic motors and valves for construction machinery, vehicle-mounted machines. Cetop directional control and proportional valves, hydraulic cylinders, pressure, quantity and stop valves for pipe and slab construction, hydraulic accessories for industrial hydraulics (mobile and stationary use).Technology...

 Open the catalog to page 20

All KRACHT GmbH catalogs and technical brochures

  1. Brochure en

    16 Pages

    En
  2. Brochure en

    12 Pages

    En
  3. Brochure en

    16 Pages

    En
  4. Brochure en

    12 Pages

    En
  5. Brochure en

    12 Pages

    En
  6. Brochure en

    12 Pages

    En
  7. Brochure en

    20 Pages

    En
  8. Brochure en

    13 Pages

    En
  9. Brochure en

    32 Pages

    En
  10. Brochure en

    12 Pages

    En
  11. Brochure en

    20 Pages

    En
  12. Brochure en

    12 Pages

    En
  13. Brochure en

    13 Pages

    En
  14. Brochure en

    8 Pages

    En
  15. Brochure en

    24 Pages

    En
  16. Brochure en

    20 Pages

    En
  17. Gear Pumps KF 0

    16 Pages

    En
  18. Brochure en

    32 Pages

    En
  19. Brochure en

    17 Pages

    En
  20. Brochure en

    20 Pages

    En
  21. Product overview

    24 Pages

    En
  22. WL4.06 GB 05-05

    8 Pages

    En
  23. DuroTec® DT

    12 Pages

    En
  24. KF 730 ... 1500

    16 Pages

    En
  25. KF-F 2.5...112

    12 Pages

    En
  26. KP 0

    12 Pages

    En
  27. KF-F 2.5 ...112

    12 Pages

    En
  28. KF 2,5...630

    32 Pages

    En
  29. KP.../434

    16 Pages

    En
  30. KF 2.5... 200

    8 Pages

    En
  31. KP .../434

    16 Pages

    En