High Pressure Gear Motors KM 1 - 28 Pages

Add to MyDirectIndustry favorites
High Pressure Gear Motors KM 1
  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

  11. P. 20

Catalog excerpts

High Pressure Gear Motors KM1

 Open the catalog to page 1

High Pressure Gear Motors KM 1 KRACHT GmbH · Gewerbestr. 20 · 58791 Werdohl, Germany · fon +49(0)23 92/2 935-0 · fax +49(0)23 92/935 209 · mail info@kracht.eu · web www.kracht.eu

 Open the catalog to page 2

KRACHT GmbH · Gewerbestr. 20 · 58791 Werdohl, Germany · fon +49(0)23 92/935-0 · fax +49(0)23 92/935 209 · mail info@kracht.eu · web www.kracht.eu 3 Accordingly to its configuration – the Design principle is illustrated by the Sectional figure above – the KRACHT External Gear-Type Motor Series KM 1 is classified in the category of the so-called Gland-Type Bearing Motors. All essential functional parts as the gearing and the gland bearings are located in an aluminium housing manufactured of a high strength extrusion alloy which is closed on each side by an end cover or by a flange mounting cover...

 Open the catalog to page 3

KRACHT GmbH · Gewerbestr. 20 · 58791 Werdohl, Germany · fon +49(0)23 92/4 935-0 · fax +49(0)23 92/935 209 · mail info@kracht.eu · web www.kracht.eu High Pressure Gear Motors KM 1 General Characteristics Mounting flange and foot-type Pipe connection flange-type Direction of rotation clockwise and anticlockwise Weight refer to dimensional sheet Fitting position optional Permissible ambient temperature range u min = -- 20 °C u max = + 60 °C Operating Characteristics Operating pressures Input side p1 max = refer to technical data Outlet side p2 max = 120 bar Drain pressure pT max = 2 bar Short time...

 Open the catalog to page 4

KRACHT GmbH · Gewerbestr. 20 · 58791 Werdohl, Germany · fon +49(0)23 92/935-0 · fax +49(0)23 92/935 209 · mail info@kracht.eu · web www.kracht.eu 5 Technical Data Nominal motor Geom. motor max. Rated Continuous max. operating Moment of inertia displacement displacement pressure pressure operating pressure speed x 10-6 Vg pmax pN pD nmax J cm3/r bar bar bar rpm kg m2 NBR FKM 5.5 5.45 300 280 250 3000 4000 35.7 6.3 6.28 300 280 250 3000 4000 39.9 8 7.9 300 280 250 3000 4000 51.1 9.6 9.59 300 280 250 3000 4000 56.5 11 10.9 300 280 250 3000 4000 62.9 14 13.85 300 280 250 3000 4000 77.7 16 15.9 260...

 Open the catalog to page 5

KRACHT GmbH · Gewerbestr. 20 · 58791 Werdohl, Germany · fon +49(0)23 92/6 935-0 · fax +49(0)23 92/935 209 · mail info@kracht.eu · web www.kracht.eu High Pressure Gear Motors KM 1 Guidance for use of the Characteristic Curves 0 0 50 35 60 55 45 40 30 20 15 10 5 25 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 60% 70% 75% 40 80 120 160 10 25 30 35 65 = 80% tot 50 20 60 180 85% 5 40 45 55 32,2 142 86% 1 2 4 3 Torque output M Nm Pressure difference Äp bar Speed n rpm Input flow Q l/min 0 0 20 14 24 22 18 16 12 8 6 4 2 10 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400...

 Open the catalog to page 6

KRACHT GmbH · Gewerbestr. 20 · 58791 Werdohl, Germany · fon +49(0)23 92/8 935-0 · fax +49(0)23 92/935 209 · mail info@kracht.eu · web www.kracht.eu High Pressure Gear Motors KM 1 0 0 50 35 60 55 45 40 30 20 15 10 5 25 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 60% 70% 75% 40 80 120 160 240 5 10 15 20 30 40 = 80% tot 25 20 87% 35 200 85% 45 Torque output M Nm Pressure difference Äp bar Speed n rpm Input flow Q l/min Characteristic Curves for Type KM 1/16 Characteristic values applicable to viscosity í = 34 mm2/s · Dispersion of the speed values n = ± 75 rpm Dispersion...

 Open the catalog to page 8

KRACHT GmbH · Gewerbestr. 20 · 58791 Werdohl, Germany · fon +49(0)23 92/935-0 · fax +49(0)23 92/935 209 · mail info@kracht.eu · web www.kracht.eu 9 High Pressure Gear Motors KM 1 0 0 50 35 60 55 45 40 30 20 15 10 5 25 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 60% 70% 75% 85% 40 80 120 160 180 5 10 15 20 30 40 55 = 80% tot 25 45 50 20 86% 35 60 65 Torque output M Nm Pressure difference Äp bar Speed n rpm Input flow Q l/min Characteristic Curves for Type KM 1/22 Characteristic values applicable to viscosity í = 34 mm2/s · Dispersion of the speed values n = ± 75 rpm Dispersion...

 Open the catalog to page 9

High Pressure Gear Motors KM 1 KRACHT GmbH · Gewerbestr. 20 · 58791 Werdohl, Germany · fon +49(0)23 92/10 935-0 · fax +49(0)23 92/935 209 · mail info@kracht.eu · web www.kracht.eu Type Key Ordering example Seals 1 NBR rotary shaft lip type seals 90 °C 2 FKM rotary shaft lip type seals Size 1 100 °C Product name Nominal motor displacement 5.5 / 6.3 / 8 / 9.6 / 11 / 14 / 16 / 19 / 22 Selection: flange mounting cover A SAE-A-2-bolt type, LA = 106.4; Ø Z = 82.55 F 2 bolt square flange, LA = 60 /60; Ø Z = 50 G 4 bolt rectangular flange, LA = 72 /100; Ø Z = 80 K 4 bolt rectangular flange, LA = 71.4...

 Open the catalog to page 10

High Pressure Gear Motors KM 1 KRACHT GmbH · Gewerbestr. 20 · 58791 Werdohl, Germany · fon +49(0)23 92/12 935-0 · fax +49(0)23 92/935 209 · mail info@kracht.eu · web www.kracht.eu M A = 30 Nm Ø 82.55 -0.05 Ø 17 11 6.35 13 0.7 Ø 15 M 12x1.5 Ø 20 +0.4 M 6-13 deep Ø 35 15.7 1.5 E 38 F 17 13 M 12x1.5 R 12 15.7 Ø 11 Ø 23 100 106.4 R 47.6 18.3 84 0.7 13 Ø 20 +0.4 M 12x1.5 100 14.5 End Cover B Input and outlet side equally sized Screw plug Drain port SAE A-Flange, Tapered Shaft End Shaft end: taper 1: 5 Hex. lock nut M 12 x 1.5 EN ISO 8675 Curved spring washer B12 DIN 137 Woodruff key 3 x 6.5 DIN 6888...

 Open the catalog to page 12

High Pressure Gear Motors KM 1 KRACHT GmbH · Gewerbestr. 20 · 58791 Werdohl, Germany · fon +49(0)23 92/935-0 · fax +49(0)23 92/935 209 · mail info@kracht.eu · web www.kracht.eu 15 MA = 30 Nm -2 15 +3 M 10 M 12x1.5 -0.050 Ø 50 -0.025 7.2 E 40.5 F 13 0.7 Ø 15 M 12x1.5 Ø 20 +0.4 M 6-13 deep Ø 35 15.7 Ø 17 1.5 17 13 14.3 60 100 60 15.7 84 -2 15 +3 M 10 -0.050 Ø 50 -0.025 7.2 E F 13 0.7 Ø 15 M 12x1.5 Ø 20 +0.4 M 6-13 deep Ø 35 15.7 h11 Ø 16.5 14 26 14.3 60 100 60 15.7 84 Drain port Drain port MA = 50+10 Nm MA = 50+10 Nm MA = 50+10 Nm MA = 50+10 Nm Input and outlet side equally sized Input and outlet...

 Open the catalog to page 15

High Pressure Gear Motors KM 1 KRACHT GmbH · Gewerbestr. 20 · 58791 Werdohl, Germany · fon +49(0)23 92/16 935-0 · fax +49(0)23 92/935 209 · mail info@kracht.eu · web www.kracht.eu MA = 30 Nm -2 15 +3 M 10 M 12x1.5 -0.050 Ø 50 -0.025 7.2 E 40.5 F 13 0.7 Ø 15 M 12x1.5 Ø 20 +0.4 M 6-13 tief Ø 35 15.7 Ø 17 1.5 17 13 60 84 -2 15 +3 M 10 -0.050 Ø 50 -0.025 7.2 E F 13 0.7 Ø 15 M 12x1.5 Ø 20 +0.4 M 6-13 deep Ø 35 15.7 h11 Ø 16.5 14 26 14.3 60 100 60 15.7 84 MA = 50+10 Nm Drain port MA = 50+10 Nm Drain port MA = 50+10 Nm MA = 50+10 Nm Input and outlet side equally sized Input and outlet side equally sized...

 Open the catalog to page 16

All KRACHT GmbH catalogs and technical brochures

  1. Brochure en

    16 Pages

    En
  2. Brochure en

    12 Pages

    En
  3. Brochure en

    16 Pages

    En
  4. Brochure en

    12 Pages

    En
  5. Brochure en

    12 Pages

    En
  6. Brochure en

    12 Pages

    En
  7. Brochure en

    20 Pages

    En
  8. Brochure en

    13 Pages

    En
  9. Brochure en

    32 Pages

    En
  10. Brochure en

    12 Pages

    En
  11. Brochure en

    20 Pages

    En
  12. Brochure en

    12 Pages

    En
  13. Brochure en

    13 Pages

    En
  14. Brochure en

    8 Pages

    En
  15. Brochure en

    24 Pages

    En
  16. Brochure en

    20 Pages

    En
  17. Gear Pumps KF 0

    16 Pages

    En
  18. Brochure en

    32 Pages

    En
  19. Brochure en

    17 Pages

    En
  20. Brochure en

    20 Pages

    En
  21. Product overview

    24 Pages

    En
  22. WL4.06 GB 05-05

    8 Pages

    En
  23. DuroTec® DT

    12 Pages

    En
  24. KF 730 ... 1500

    16 Pages

    En
  25. KF-F 2.5...112

    12 Pages

    En
  26. KP 0

    12 Pages

    En
  27. KF-F 2.5 ...112

    12 Pages

    En
  28. KF 2,5...630

    32 Pages

    En
  29. KP.../434

    16 Pages

    En
  30. KF 2.5... 200

    8 Pages

    En
  31. KP .../434

    16 Pages

    En