Hydromat HW20/10 and HW25/12 - 6 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

Catalogue excerpts

Pfiffner Hydromat® HW25/12, HW 20/10 Flexible Rotary Transfer Machines Horizontal transfer system Complete, double-side machining as part of the process Optimised for performance Model Brochure

 Open the catalogue to page 1

Automobile industry Electronics and telecommunications Security and lock technology Household appliances Hydromat® HW: for high flexibility, productivity and economy Pfiffner has been constructing special, highlydeveloped machinery for the manufacture of mass-produced workpieces since 1976. These electro-hydraulic, rotary transfer machines can be used for machining from bar stock, coil materials, or parts that are fed in automatically. An intelligent module system offers a high degree of flexibility: The construction and equipping of Pfiffner machines are essentially determined by the workpiece...

 Open the catalogue to page 2

Fastening technology Fittings Hydraulics and pneumatics Gas and welding fitted with commercially available collet chucks of the W 25 type. This allows bar and profile materials of up to 25 mm in diameter and 100 mm in length to be machined without a problem. In spite of being clamped, the workpieces can be worked from both sides. A special turning unit takes out the individual parts and, after turning them through 180°, feeds them back into the chuck. There is no need for an additional removal unit on completion of the machining: the completed workpieces are automatically ejected between the last...

 Open the catalogue to page 3

The consistent modular nature and flexibility of the mechanical systems are also reflected in the machine’s electrical control concept. The SIMATIC S7 from Siemens forms the basis of the machine control system. The integrated, Hydromat®-specific user screen facilitates the simple, dialogueled operation and programming of the machine. Repetitive machining tasks can be stored and called up again when needed, a feature which makes re-tooling much easier. In addition, the unified operating concept of all base machine models reduces training expenditure to a minimum. The machine’s control system concept...

 Open the catalogue to page 4

HW 20/10 HW 25/12 Number of stations 10 12 Number of machining units Horizontal max. 10 12 Vertical max. 5 6 Total units 15 18 Rotary indexing Indexing 10-piece 12-piece Indexing time 0.5 seconds 0.5 seconds Collet chucks Number 10 12 Type W 25 W 25 Max. clamping Ø 25 mm 25 mm Workpiece Max. workpiece length 100 mm 100 mm Machine weight Approx. 3,500 kg Approx. 4,000 kg inc. bar magazine (3 m) Machine dimensions Length 8.9 m Width 3.3 m Height 2.9 m

 Open the catalogue to page 5

Head Office: K.R. Pfiffner AG Gewerbestrasse 14 P.O. Box 229 CH-8800 Thalwil Switzerland Telephone +41 01 722 66 66 Telefax +41 01 722 66 77 info@pfiffner.com www.pfiffner.com K.R. Pfiffner GmbH Axtbühl 2 D-78658 Zimmern o.R. Germany Telephone +49 (0)741 92 88 0 Telefax +49 (0)741 92 88 155 info@pfiffner.de www.pfiffner.com K.R. Pfiffner (UK) Ltd. 9 Manor Court Yard Hughenden Avenue High Wycombe GB-Bucks HP13 5RE England Telephone +44 (0)1494 510 166 Telefax +44 (0)1494 510 211 pfiffner.uk@btinternet.com www.pfiffner.com Hydromat® is a registered trademark of K.R. Pfiffner AG. Copyright by K.R....

 Open the catalogue to page 6

All K.R. Pfiffner AG catalogues and technical brochures

  1. model overview

    8 Pages

    En
  2. Hydromat-overview

    14 Pages

    En

Archived catalogues