Power over Ethernet

detection, class ID 0~3 follow IEEE802.3af standard V+ (Pin 4,5), V- (Pin 7,8), Tx (Pin 1,2), Rx (Pin 3,6) Power over Ethernet is an useful technology for powering devices where it would be inconvenient, expensive or unfeasible to supply power separately. JetBox 9310 implements the IEEE802.3af standard as a PSE (Power Sourcing Equipment) to provide 48 volts DC over two of the four available pairs on a Cat. 3/Cat. 5e/Cat6 cable with a maximum current of 400 mA for a maximum load power of 15.4W.The IEEE802.3af standard describes two types of devices: PSE (Power Sourcing Equipment) and PD (Powered Devices). PSE provides power to the PDs.
IP CameraIP IntercomSecurity Card ReaderWireless Access Point internet Point Dual Power Inputs JetBox 9310 EthernetPoEPower

SNMP Control & MIB

SNMP (Simple Network Management Protocol) which is used in networking management systems to monitor network-attached devices. JetBox 9310 provides complete SNMP v1, v2c, v3 protocol and MIBs (Management Information Bases). Customers can use one or more systems to manage a number of devices through JetBox 9310 SNMP control. MIBs is a collection of network management information with organized hierarchy and can be accessed by using a network management protocol like SNMP. A MIB hierarchy can be illustrated as a MIB tree. Korenix provides the SNMP private MIB to let users compile it into the MIB browser.

JetBox Virtual COM Commander

Virtual COM can be useful in case there is a lack of available physical serial ports or to communicate with any other serial devices via internet or LAN (Serial-over-Ethernet technology). The physical communication can travel by software through TCP server/ client and UDP modes, and also through the virtual COM mode. Customers can install the virtual COM driver by installing JetBox Commander. Customers can manage virtual COMs through JetBox Commander. 187 www.korenix.com