See other catalogues for
Kop-Flex
You may also be interested in
Text version of the page
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Sleeve Couplings | | |
| | | |
| | | Finished Bore Sleeve Couplings are machined from bar steel. They are fitted with Hollow Head Set Screws. | | |
| | | |
| | | canons | | |
| | | Table No. 1 | | |
| | | |
| | | |
| | | | | | | | | | | | | | Part No. | O.D. | L | B | C | Wt. | | | | CS—04 | 1/2" | 3/4" | 1/4" | 3/16" | .06 | | | | CS—05 | 5/8 | 1 | 5/16 | 1/4 | .06 | | | | CS—06 | 3/4 | 1 | 3/8 | 1/4 | .1 | | | | CS—08 | 1 | 11/2 | 1/2 | 3/8 | .2 | | | | *CS—10 | 1 1/4 | 2 | 5/8 | 1/2 | .5 | | | | *CS—12 | 11/2 | 2 | 3/4 | 1/2 | 8 | | | | *CS—14 | 13/4 | 2 | 7/8 | 1/2 | 1.0 | | | | *CS—16 | 2 | 3 | 1 | 3/4 | 1.9 | | | | *CS—18 | 21/8 | 3 | 11/8 | 3/4 | 2.1 | | | | *CS—20 | 21/4 | 4 | 11/4 | 1 | 3.1 | | | | *CS—22 | 21/2 | 41/2 | 1 3/8 | 1 | 4.3 | | | | | | | | | | | | | |
| | | mm | | |
| | | |
| | | O.D. | | |
| | | |
| | | Y////////////A | | |
| | | |
| | | L | | |
| | | |
| | | |
| | | * These sizes are also available with Standard Keyseats. Indicate Keyseat by adding "K" to part number; for example "CS-12K." | | |
| | | |
| | | BUSHED TYPE SLEEVE COUPLINGS | | |
| | | |
| | | are machined from steel for use with SPLIT TAPER™ Bushings. Type CSH Type CSP and CSQ | | |
| | | |
| | | Table No. 2 Specifications | | |
| | | |
| | | | | | | | | | | | | | | | | | | | Part No. | BUSHING | DIMENSIONS | | Wt. | | | | Size | Bore Range | O.D. | L | H | G | X | E | Lbs. | | | | CSH | H | | 3/8" - 1 1/2" | 2 1/2" | 2 7/8" | 2 1/2" | 7/16" | 2" | 3/16" | 1700 | 1.6 | | | | CSP | P1 | | 1/2 - 1 3/4 | 3 | 4 1/4 | 3 | 5/8 | 3 | 1/4 | 5660 | 3.4 | | | | CSQ | Q1 | | 3/4 - 2 11/16 | 43/8 | 5 1/2 | 4 1/8 | 3/4 | 4 | 9/32 | 14600 | 9.6 | | | | | | | | | | | | | | | | | | | |
| | | |
| | | •AT = Maximum Recommended Torque in inch pounds for Normal Service. For Shock Loads reduce these ratings by 50%. Maximum Torque shown is based on coupling strength. Smaller shafts in the coupling bore range and short key applications may not transmit this maximum torque, check shaft and key stress. NOTE—Order two Bushings. | | |
| | | |
| | | 124 | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
