Catalogs >
Koike >
Accuflow Argon 16/30 Flow

Accuflow Argon 16/30 Flow
2Pages

Catalog excerpts

Argon Regulator for TIG or MIG Welding Features & Benefits I Patent Pending This exclusive flow select system allows accurate gas flow control by simply adjusting the dial, saving both time and gas I No Flow Tube No worries about flow tube needing to be upright to function, ball centering inaccuracies or tube breakage I Chrome Plated Durable finish on fittings provides corrosion resistance One Touch Flow Selector System for TIG or MIG Welding The Accu-Flow for TIG or MIG welding from Koike Aronson utilizes a unique flow adjustment system. The flow rate of argon gas is adjustable with just a touch versus flow meter type regulators. The Accu-Flow helps to reduce gas waste by allowing the operator to set the exact flow setting quickly and easily, thus preventing excessive use of expensive Argon gas. I Piston System Design The pressure regulating mechanism is free from pressure variation, ensuring high accuracy and durability I Triple Filters Three inlet gas filters prevent dirt and grit from entering the system I Compact and Lightweight Only .59 kg (1.3 lb), easy enough to carry just about anywhere I Two Models Available AR-16 allows accurate setting of low volume gas settings. AR-30 allows accurate setting of high volume gas settings.

Open the catalog to page 1

ACCU-FLOW Gas Flow Regulator for TIG Welding SPECIFICATIONS Flow Rate Regulation Method Flow Rate Regulation Range 1) Before opening cylinder valve, set the scale division at “0”. 2) Turn the dial clockwise to increase flow rate gradually. 3) For setting flow rate, match the corresponding scale division of dial with the scale set point. At “0” the gas does not flow. 4) Return setting to “0” after use. 5) To terminate operation, close the cylinder valve and discharge gas from inside regulator by turning the dial clockwise then back to “0”. If desired, disconnect regulator from the cylinder....

Open the catalog to page 2