Operation manual M
2Pages

Product Details Installation/Disposal Guidelines Troubleshooting Guidelines Pouch Spring Housing Pouch Plate Grease Pouch Check the grease pouch capacity and the service pack items (battery pack, grease pouch & dust cover). Carefully screw the grease pouch in by turning clockwise. Do not over tighten. Select the appropriate grease pouch capacity by pressing the 125/250/TEST button. Note the installation date and the scheduled completion date of lube cycle on the lubricator using the label provided in the Service Pack for maintenance purposes. Pump Ensure a clear passage using a manual grease gun. Note1 Remove any hardened grease Main Body by purging the lube point with a manual grease gun. Note2 The grease in the equipment and the grease contained in the unit should be the same or compatible. Worm Gear Connecting Thread (3/8" M BSPT) Remove contaminants around the lube point. Remove the grease nipple and install appropriate adaptors. Insert battery pack. Purge the grease pouch until grease comes out of the tip. Refit the top housing on the unit and turn clockwise until it clicks. Press the POWER button for 2 seconds to turn the unit on. Press the MODE button to program the dispensing period. Press the TEST button for 2 seconds to run a test cycle and check for proper operation of the unit. Symptom: Blank LCD screen Possible Cause: Electrical malfunction of CPU or circuitry, battery problem Solution: Replace battery pack or press reset button to restart the lubricator. If the problem persists, contact your supplier. Install the Pulsarlube M unit on the lube point. When the selected dispensing period has completed, replace the unit with the Service Pack according to step #3~7. Symptom: Low Battery Indication Possible Cause: Rapid power consumption due to improper storage or harsh operating conditions (temperature, humidity, or high backpressure). Remedy: Store the battery pack in cool, dry place and choose proper battery type for application. Optional lithium battery pack is available for more advanced applications. Install the dust cover over the lubricator for added protection. Symptom: Excessive Backpressure Indication Possible Cause: Excessive backpressure due to hardened grease, over-lubrication, ruptured lube line, long distance remote installation, etc. Solution: A) Check backpressure at lube point and/or lube line, B) check grease dispensing rate, C) reduce remote installation distance, or D) use manual grease gun to clear blockage.

Mounting Methods Selecting the dispensing period Single Point Installation Deactivate 'Automatic Lock Out' mode by pressing the button for 2~3 seconds Direct Mount or Remote Installation using Extension Tube Direct mount is always preferable. For applications not allowing any direct mounts, remotely mount the unit using appropriate accessories and keep the distance from the lube point as short as possible. Power ON/OFF Press the button for 2 seconds to turn unit on or off For 125ml/250ml unit A) Press the button to select 125ml or 250ml capacity B) Hold the button for 2 seconds to run a...