|
|
See other catalogues for Kia Heavy Industries
You may also be interested in
Text version of the page
| | | | | | | | | | | | | | | | | | | KIT250 / KIT400 | | | | | | | | | | Specification | | | | | | | | | | | | | | | | | | | | | | | | ITEM | | | | | | | CHUCK | Standard size | inch | 5 | 6 | 6 | 10 | | | | Optional size | | | | | | | Swing over the bed | | 320 [12.6] | 510 [20.1] | 530 [20.9] | 780 [30.7] | | | | | Swing over the cross slide | | | 170 [6.7] | 170 [6.7] | 424 | | | | CAPACITY | Maximum turning | Turning | mm [in] | 160 [6.3] | 165 [6.5] | 165 [6.5] | 530 [20.9] | | | | diameter | Milling | - - - - | | | | | Maximum turning length | | 150 [5.9] | 270 [10.6] | 325 [12.8] | 530 [20.9] | | | | | Bar capacity | | 32 [1.26] | 45 [1.77] | 45 [1.77] | 65 [2.56] | | | | | | X | | 250 [9.8] | 400 [15.8] | 450 [17.7] | 450 [17.7] | | | | TRAVEL | Axis | Y | mm [in] | N/A | N/A | N/A | N/A | | | | Z | 200 [7.9] | 250 [9.8] | 300 [11.8] | 550 [21.7] | | | | | | ZB | | | | | | | Maximum spindle speed | rpm | 7,000 | 6,000 | 6,000 | 4,000 | | | | MAIN | Spindle nose | | «110 | A2-5 | A2-5 | A2-8 | | | | Spindle bore | mm [in] | 42 [1.65] | 54 [2.13] | 52 [2.05] | 78 [2.61] | | | | SPINDLE | Maximum spindle torque | kgf-m [ft-lbs] | 4.9 [35.4] | 7.14(8.12) /[51.6](58.7) | 9.74(7.14) [70.4](51.6) | 7.14 [51.6] | | | | | Speed drive | | BELT | BELT | BELT | BELT | | | | | Chuck size | mm [in] | N/A | N/A | N/A | N/A | | | | | Maximum spindle speed | rpm | | | | | SUB | Spindle nose | | | | | | Spindle bore | mm [in] | | | | | SPINDLE | Bar capacity | mm [in] | | | | | | Maximum spindle torque | kgf-m [ft-lbs] | | | | | | Speed drive | | | | | | | Type | | Gang | Gang | Gang | Gang | | | | | Number of tool | EA | | 6 | 6 | | | | | TOOL | Tool Size | O.D | mm [in] | 20 [3/4] | 20 [3/4] | 20 [3/4] | 25 [1.0] | | | | POST | I.D | 25 [1.0] | 25 [1.0] | 32 [1 1/4] | 32 [1 1/4] | | | | | Turret clamping force | kgf-m [ft-lbs] | N/A | N/A | N/A | N/A | | | | | Turret indexing time (1 face) | sec. | | | | | MILLING TOOL | Type | | N/A | | | | Max. speed | rpm | | | | | Motor power | kw [hp] | | | | | | | X axis | | 24 [945] | 30 [1,181] | 30 [1,181] | 36 [1,417] | | | | | | Y axis | | | | | | FEED | Rapid traverse rate | Z axis | m/min [in] | 30 [1,181] | 36 [1,417] | 36 [1,417] | 36 [1,417] | | | | | | ZB axis | - - - - | | | | | | C axis | | - - - - | | | | | Type | | N/A | N/A | N/A | N/A | | | | TAIL STOCK | Quill bore taper | | | | | | Quill diameter | | | | | | Quill travel | mm [in] | | | | | | Tail stock travel | | | | | | | Spindle | Main | | 5.5/3.7 [7.3/5] | 11/7.5(12.5/7) [14.7/10](16.7/9.3) | 15/11(12/9) [20.1/14.7](16/12) | 11/7.5 [14.7/10] | | | | | Sub | | - | | | | MOTOR | Feed | X/Z | kw [hp] | 0.75/0.75 [1/1] | 1.2(1.48) [1.6](2.0) | 1.8(2.3) [2.4](3.1) | 1.6/1.6 [2.1/2.1] | | | | | Y/ZB | | - | | | | | Coolant | | | | | | Bed slant | deg. | Flat | 60" | 60" | 45" | | | | Slide way | | Ball guide | Ball guide | Ball guide | Ball guide | | | | Power capacity | Fanuc | kVA | 20 | 20 | 20 | 20 | | | | Siemens | | | | | | Floor space (LxW) | Fanuc | mm [in] | 1,680x1.476 [66.1 x 58.1] | 1,970 x1,355 [77.6 x 53.3] | 2,100x1,435 [82.7 x 56.5] | 2,900 x 1,650 [114.2 x 65.0] | | | | Siemens | | | | | Weight | kgf [lbs] | 1,900 [4,189] | 2,500 [5,512] | 2,700 [5,952] | 4,300 [9,480] | | | | Controller | STD | FANUC 0iT | FANUC 0iT | FANUC 0iT | FANUC 0iT | | | | OPT | | SIEMENS 802D | SIEMENS 802D | | | | | | | | | | | | | | | | | | | | | | | | Design and Specifications are subject to change without prior notice. | | | | | | | | | | | | | | | | | | |
|
