Catalogue - THINK MILLING, THINK KENNAMETAL - Kennametal - (Version JPG)

Application Data

KS kennametal

HPHV


			! m*		■	Reduce speed by 20% for slotting applications
	ae					Reduce speed by 20% for slotting applications
	Application					Vc K633	Recommended fz- Feed Per Tooth (Inch/th) for side cutting operations. For slotting operations, reduce fz by 20%. D1- Diameter (Inch)
	Side Milling			Slotting		Vc K633
Group	ap	ae		ap		SFM	1/8"	3/16"	1/4"	5/16"	3/8"	1/2"	5/8"	3/4"	1"
P2	1XD	0.5XD		1XD		500~600	.0012	.0014	.0016	.0021	.0026	.0031	.0034	.0036	.0040
P3	1XD	0.5XD		1XD		400~500	.0012	.0014	.0016	.0021	.0026	.0031	.0034	.0036	.0040
P4	1XD	0.5XD		1XD		300~400	.0008	.0010	.0012	.0016	.0021	.0026	.0031	.0034	.0036
P5	1XD	0.5XD		1XD		225~275	.0012	.0014	.0016	.0021	.0026	.0031	.0034	.0036	.0040
M1	1XD	0.5XD		1XD		275~375	.0008	.0010	.0012	.0016	.0021	.0026	.0031	.0034	.0036
M2	1XD	0.5XD		1XD		200~275	.0004	.0008	.0012	.0014	.0016	.0020	.0022	.0026	.0031
M3	1XD	0.5XD		1XD		125~200	.0004	.0008	.0012	.0014	.0016	.0020	.0022	.0026	.0031
K1	1XD	0.5XD		1XD		425~525	.0014	.0015	.0017	.0022	.0028	.0034	.0036	.0039	.0050
S1	1XD	0.2XD		0.3XD		65~90	.0004	.0008	.0010	.0012	.0014	.0016	.0018	.0020	.0022
S2	1XD	0.2XD		0.3XD		65~90	.0004	.0008	.0010	.0012	.0014	.0016	.0018	.0020	.0022
S3	1XD	0.2XD		0.3XD		65~90	.0004	.0008	.0010	.0012	.0014	.0016	.0018	.0020	.0022
S4	1XD	0.3XD		0.5XD		135~175	.0008	.0010	.0014	.0016	.0020	.0022	.0026	.0029	.0034

These guidelines may require variations to achieve optimum results.

HPRSHV

Tl W

Reduce speed by 20% for slotting applications


	Application			Vc K633	Recommended fz- Feed Per Tooth (Inch/th) for side cutting operations. For slotting operations, reduce fz by 20%. D1- Diameter (Inch)
	Side Milling		Slotting	Vc K633
Group	ap	ae	ap	SFM	1/2"	5/8"	3/4"	1"
P2	1XD	0.3XD	0.35XD	400~500	.0025	.0028	.0030	.0033
P3	1XD	0.3XD	0.35XD	400~500	.0025	.0028	.0030	.0033
P4	1XD	0.3XD	0.35XD	300~400	.0022	.0026	.0028	.0030
P5	1XD	0.3XD	0.35XD	225~275	.0025	.0028	.0030	.0033
M1	1XD	0.3XD	0.35XD	240~300	.0022	.0027	.0030	.0033
M2	1XD	0.3XD	0.35XD	200~250	.0017	.0024	.0027	.0029
M3	1XD	0.3XD	0.35XD	185~225	.0017	.0024	.0027	.0029
K1	1XD	0.3XD	0.35XD	425~525	.0028	.0030	.0035	.0040
S1	1XD	0.2XD	0.25XD	75~125	.0014	.0016	.0018	.0020
S2	1XD	0.2XD	0.25XD	75~125	.0014	.0016	.0018	.0020
S3	1XD	0.2XD	0.25XD	65~90	.0014	.0016	.0018	.0020
S4	1XD	0.3XD	0.35XD	125~175	.0018	.0022	.0024	.0026

co _I

LU CC

cd LU

These guidelines may require variations to achieve optimum results.

HPHVT

Reduce speed by 20% for slotting applications

"ae^-

-mm


	Application			Vc KC643M	Recommended fz- Feed Per Tooth (Inch/th) for side cutting operations. For slotting operations, reduce fz by 20%. D1- Diameter (Inch)
	Side Milling		Slotting	Vc KC643M
Group	ap	ae	ap	SFM	1/2"	5/8"	3/4"	1"
S1	1XD	0.2XD	0.5XD	85~125	.0016	.0020	.0023	.0024
S2	1XD	0.2XD	0.5XD	85~125	.0016	.0020	.0023	.0024
S3	1XD	0.2XD	0.3XD	85~125	.0016	.0020	.0023	.0024
S4	1XD	0.3XD	1XD	150~190	.0024	.0028	.0030	.0036

X LU

These guidelines may require variations to achieve optimum results.

To place an order, contact Kennametal or your authorized Kennametal distributor, or visit www.kennametal.com.

THINK MILLING, THINK KENNAMETAL - Kennametal - #44