Catalogue - THINK MILLING, THINK KENNAMETAL - Kennametal - (Version JPG)

KXkennametal

Application Data

HEC

_u 23

2D 2C

Reduce speed by 20% for slotting applications


	Application			Vc K600	Vc KC610M	Vc KC635M	Recommended fz- Feed Per Tooth (Inch/th) for side cutting operations. For slotting operations, reduce fz by 20%. D1- Diameter (Inch)
	Side Milling		Slotting	Vc K600	Vc KC610M	Vc KC635M
Group	ap	ae	ap	SFM	SFM	SFM	1/16"	1/8"	3/16"	1/4"	5/16"	3/8"	1/2"	5/8"	3/4"	1"
P2	1XD	0.1XD	0.5XD	200~300	300~400	350~450	.0004	.0006	.001	.0015	.0020	.0025	.0030	.0035	.0040	.0045
P3	1XD	0.1XD	0.5XD	175~300	175~300	250~350	.0003	.0005	.0007	.0010	.0015	.0020	.0024	.0028	.0030	.0035
P4	1XD	0.1XD	0.5XD	N/A	N/A	175~325	.0002	.0004	.0005	.0010	.0011	.0015	.0020	.0025	.0027	.0030
P5	1XD	0.1XD	0.5XD	N/A	200~350	250~450	.0002	.0004	.0006	.0010	.0015	.0020	.0024	.0026	.0030	.0035
M1	1XD	0.1XD	0.5XD	N/A	225~400	275~500	.0004	.0006	.0008	.0012	.0015	.0020	.0025	.0030	.0035	.0040
M2	1XD	0.1XD	0.5XD	N/A	N/A	200~450	.0002	.0003	.0004	.0007	.0010	.0015	.0017	.0025	.0030	.0035
M3	1XD	0.1XD	0.5XD	N/A	N/A	175~400	.0002	.0003	.0004	.0007	.0010	.0015	.0017	.0025	.0030	.0035
K1	1XD	0.1XD	0.5XD	300~450	N/A	425~725	.0005	.0007	.0015	.0020	.0025	.0030	.0040	.0050	.0060	.0070
K2	1XD	0.1XD	0.5XD	200~300	N/A	400~600	.0005	.0007	.0015	.0020	.0025	.0030	.0040	.0050	.0060	.0070
S1	1XD	0.1XD	0.5XD	N/A	N/A	65~125	.0002	.0004	.0006	.0009	.0012	.0015	.0018	.002	.0024	.0027
S2	1XD	0.1XD	0.5XD	N/A	N/A	65~125	.0002	.0004	.0006	.0009	.0012	.0015	.0018	.002	.0024	.0027
S3	1XD	0.1XD	0.5XD	N/A	N/A	65~125	.0002	.0004	.0006	.0009	.0012	.0015	.0018	.002	.0024	.0027
S4	1XD	0.1XD	0.5XD	N/A	N/A	100~200	.0004	.0008	.0012	.0015	.0018	.0022	.0025	.0028	.0030	.0035

Ec _u

These guidelines may require variations to achieve optimum results.

HHEC

Reduce speed by 20% for slotting applications


	Application		Vc KC635M	Recommended fz- Feed Per Tooth (Inch/th) for side cutting operations. For slotting operations, reduce fz by 20%. D1- Diameter (Inch)
	Side Milling		Vc KC635M
Group	ap	ae	SFM	1/8"	3/16"	1/4"	5/16"	3/8"	1/2"	5/8"	3/4"	1"
M1	1XD	0.1XD	275~500	.0005	.0007	.0010	.0015	.0020	.0025	.0030	.0035	.0040
M2	1XD	0.1XD	200~450	.0005	.0007	.0010	.0015	.0020	.0025	.0030	.0035	.0040
S1	1XD	0.1XD	100~175	.0003	.0004	.0005	.0006	.0007	.0010	.0015	.0022	.0025
S2	1XD	0.1XD	100~175	.0003	.0004	.0005	.0006	.0007	.0010	.0015	.0022	.0025
S3	1XD	0.1XD	65~95	.0003	.0004	.0005	.0006	.0007	.0010	.0015	.0022	.0025
S4	1XD	0.1XD	150~200	.0003	.0004	.0006	.0009	.0010	.0015	.0018	.0022	.0025

LO 1

These guidelines may require variations to achieve optimum results.

LO 1

23 < _u

5 <

_u 23

To place an order, contact Kennametal or your authorized Kennametal distributor, or visit www.kennametal.com. 43

THINK MILLING, THINK KENNAMETAL - Kennametal - #43