THINK MILLING, THINK KENNAMETAL - Kennametal - (Version JPG) - Page n° 379 - PDF Catalogue | Technical Documentation

kennametal

KSWM KenFEED

Indexable End Mills

Cutting diameter of 1.5".

Feed rates up to .118 ipt for high metal removal rates, depending on workpiece material.

Suitable for a wide range of applications, including helical interpolation, ramping, slotting, face milling, and contour milling for roughing applications

Enables higher productivity.

Stable clamping system.

Three cutting edges per insert.


	1-0-1 « ^

	"\|api ' l2

2D 2C

_LJ

End Mills


D1	order number	catalog number	Z	D	L2	L	D min	Ap1 max	Max Ramp Angle	lbs.
1.500	2509390	KF150WP0603C125L300	3	1.250	3.000	6.000	2.980	.060	5.0°	1.98
1.500	2509391	KF150WP0603C125L400	3	1.250	4.000	7.000	2.980	.060	5.0°	1.25
1.500	2509392	KF150WP0603C150L600	3	1.500	6.000	9.000	2.980	.060	5.0°	3.82

Spare Parts

insert

insert screw

Torx wrench

torque (in.-lbs.)

ZD LO

1.500

WP..06X4....

MS1184

FT-15

• Cutting diameter ranges of 2", 2.5", and 3".

• Feed rates up to .118 ipt for higher metal removal rates, depending on the workpiece material.

• Suitable for a wide range of applications, including helical interpolation, ramping, slotting, face milling, and contour milling for roughing applications.

• Enables higher productivity.

• Stable clamping system.

• Three cutting edges per insert.

LO 1

Shell Mills


D1	order number	catalog number	Z	D	L	Ap1 max	Max Ramp Angle	lbs.
2.000	2509403	KF200WP0804S075L157	4	.750	1.570	.060	4.0°	.72
2.500	2509404	KF250WP0804S100L175	4	1.000	1.750	.060	2.5°	1.83
3.000	2509405	KF300WP0805S125L175	5	1.250	1.750	.060	1.5°	1.89

LO 1

Spare Parts


D1	insert 1	insert screw	Torx wrench	Torque (in.-lbs.)	SHCS
2.000	WP..080615...	191.726	FT20	53	S445
2.500	WP..080615...	191.726	FT20	53	S458

5 <

173

3.000

WP..080615...

191.726

FT20

S2172C


Ordering Example:
1	x	KF200WP0804S075L157
10	x	WPMT080615ZZSRHN KC522M

To place an order, contact Kennametal or your authorized Kennametal distributor, or visit www.kennametal.com.

379

THINK MILLING, THINK KENNAMETAL - Kennametal - #379

Turning insert, Insert drill, Chamfering tool, ER collet, End mill