catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
P. 21
P. 22
P. 23
P. 24
P. 25
P. 26
P. 27
P. 28
P. 29
P. 30
P. 31
P. 32
P. 33
P. 34
P. 35
P. 36
P. 37
P. 38
P. 39
P. 40
P. 41
P. 42
P. 43
P. 44
P. 45
P. 46
P. 47
P. 48
P. 49
P. 50
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You may also be interested in
Shoulder milling cutter, Chamfering tool, Tool-holder, Boring tool, Face milling-cutter
Text version of the page
Grade Descriptions
SOLID CARBIDE gradescoating compositionrecommended use K600 Carbide grade made from high quality, micro-grain materials for cutting all types of workpiecematerials. Very high toughness ensures a controlled wear rate. The micro-grain structure enablesextremely sharp cutting edges.INSERTS KC610M Carbide grade made from high quality, micro-grain materials for cutting all types of workpiecematerials. Very high toughness ensures a controlled wear rate. The micro-grain structure enables extremely sharp cutting edges.
FACE MILLS KC625M Coated carbide grade with PVD multi-layer (TiN/TiCN/TiC). For universal use due to its high wearresistance and hardness. Only use wet or with minimal amounts of lubrication.
90Ëš MILLS KC633M Coated carbide grade with PVD coating (TiAlN/TiN/TiAlN). KC633M is a high-performance grade for dry milling all types of material. This grade is characterized by good hardness and wearresistance. It provides outstanding protection for solid carbide tools against cratering and abrasion. KC635M Coated carbide grade with 3 µ m thick PVD coating (TiAlN). KC635M is a high-performance gradefor hard machining. This grade is characterized by high hardness and wear resistance and is suitable for cutting hard materials (up to 65 HRC).
SLOTTING KC643M Coated carbide grade with PVD (AlTiN) coating. KC643M is a very thin and hard PVD coating particularly suitable for cutting most materials. This grade can be used for materials with hardness up to 52 HRC.
DIE AND MOLD KC651M The PVD coating is extremely hard and provides very good wear characteristics at high cutting speeds. Resists built-up edge, can help reduce deburring, and generates excellent surface finish.Ideally suited for aluminum
CERAMIC MILLS KDF300 A pure, diamond-coated carbide for milling aluminum, graphite, and other non-ferrous materials. It is a very tough and wear-resistant grade.
CLASSIC MILLS THREAD MILLS TECHNICAL DATA INDEX