Catalogue - Lathe Tooling Catalog 4010 - Kennametal - (Version JPG)

See other catalogues for Kennametal

Shoulder milling cutter, Collet chuck, Thread milling cutter, Tap, Milling tool

Text version of the page

Positive Wiper Inserts - Application Technology

•XL

Surface Finish

Carbide and Ceramic Inserts

l/l Ì/1

Tipped CBN Inserts

15 =>


insert	Theoretical Surface Finish - R_a \| in. (\| m) ^afeed rate - ipr (mm/rev)
Insert Size and Type IC	.004 (0,10)	.006 (0,15)	.008 (0,20)	.012 (0,30)
FW 1/4" (6,35 mm)	6 (0,14)	13 (0,32)	22 (0,58)	—
MW 3/8" (9,53 mm)	4 (0,11)	9 (0,24)	17 (0,43)	38 (0,97)

•XL

Theoretical Surface Finish - R_a

1 in. (1 m) feed rate - ipr (mm/rev)

insert

O l/l

o p

l/l

CCMT and CPMT Inserts

SCREW-ON Toolholders and Boring Bars

surface with wiper effect ■ surface with designated insert nose radius

D x

3 z

t/1

SCL

SCK

C.MT wiper

t/1

15 <

C.MT 80° inserts require 5° reverse lead C.MT 100° inserts

SCL toolholders. require 15° lead SCK toolholders.

DCMT- and DPMT-Style Inserts

surface finish with wiper effect — — — surface with designated insert nose radius

surface finish with .016" (0,41mm) radius

SCREW-ON Toolholders and Boring Bars

D Style

SDJ

SDN

SDU

D.MT 55° inserts require a 3° reverse lead angle and can be used in SDN, SDU, and SDJ style toolholders and boring bars

A22