Catalogue - Die and Mould - Kennametal - (Version JPG)

See other catalogues for Kennametal

Turning insert, Collet chuck, Bar, Carbide milling cutter, Tool

Text version of the page

_HSK - Form A Hollow Taper Shank Design Features

DIN 69893 Part 1

* Position of cutting edge on single-cutting tools

60°


HSK-A		HSK-A DIN 69 893 part 1, form A
	M	bl ± 0,04	h10		h11	^d10 max	^d16	- 0,1	^f2 min	h - 0,2	JS10	_n 1) "max (min^-1)
HSK32		7,05	32	24	21,0	26	M10x 1,0	20	35	16	8,92	50 000
HSK40		8,05	40	30	25,5	34	M12x 1,0	20	35	20	11,42	42 000
HSK50		10,54	50	38	32,0	42	M16x 1,0	26	42	25	14,13	30 000
HSK63		12,54	63	48	40,0	53	M18x 1,0	26	42	32	18,13	25 000
HSK80		16,04	80	60	50,0	67	M20 x 1,5	26	42	40	22,85	20 000
HSK100		20,02	100	75	63,0	85	M24x1,5	29	45	50	28,56	16 000

For use in machining centres, milling and special machines, generally with automatic tool change.

The coolant transfer unit prevents coolant from flowing back into the machine spindle or clamping system.

HSK DIN 69893 part 2, form B and form D, and initial standards part 5, form E and part 6, form F, are available on request.

HSK adaptors specially designed for higher spindle speeds and high precision are finely balanced, balanced by design and balanced or balanceable with balancing rings. Please refer to the catalogue for further information about individual tool adaptors.

Design:

- central internal coolant supply from coolant transfer unit

- bore for DIN 69873 data carrier

- 2 transverse bores in taper for manual clamping

- torque transfer via 2 drive slots on the end of the taper

- positioning groove

- positioning faces for tool hopper

Notes:

¹) In the context of HSK standardisation, these limiting speeds are recommended as standard values for HSK interfaces.

Coolant supply unit has to be ordered separately.

Die and Mould - Kennametal - #321

Turning insert, Collet chuck, Bar, Carbide milling cutter, Tool