Shrink Fit System
® Shrinking Technology Chuck Adaptor/Cooling Adaptor In order to reduce the cooling-down times,cooling adaptors are used to dissipate the
heat via cooling fins. These cooling fins are in
turn air-cooled by a fan. This achieves a heat
dissipation rate that is ten times faster than
that in conventional
industrial cooling systems.The heating/cooling generator has 5 coolingslots. One fan serves to cool the adaptor even
during the heating-up phase, whilst the other
four cool the adaptor to room temperature.
When the cooling adaptor is placed in the
cooling slot, the fans are activated by a
light barrier and switch off again automatically after
2 minutes. The chuck is
industrial safe to pick up after
just 60 seconds.The next tool can be clamped or releasedduring the cooling process. This means that 3-4 tools can be clamped and released per
minute.This number of tool changes is
sufficient for economic, practical and efficient
handling.
Tool shank tolerance: ø h 6 C
30