Text version of the page 
®
Chuck for DRILL-FIX with Eccentric Adjustment
With Coolant RingWithout Coolant Ring
R1/4" dd
21 dd
21 2 ° bl 2 °
1 l
1 SK 40SK 50 DI N M A SDI N DI N M A S DINØ d Coolantringn
max max 1 6987 1 403 BT20806987 1 403 BT 2080d
2 l
1 b20 [U/min]p [bar]Weight[kg] CODE oldCODE BT40BEWD20096M •6396-4800203,0 5.36040-313720 20 DV40BEWD20090M •6390-4800203,0 5.36040-153720 32 BT40BEWD32114M •63114-4800203,4 5.36040-313732 32 DV40BEWD32108M •63108-4800203,4 5.36040-153732 32 DV40RMEWD32108M ••90108424800204,0 5.36040-143632 32 DV50BEWD32108M •63108-4800204,3 5.36050-153732 32 DV50RMEWD32108M ••90108424800206,9 5.36050-143632 32 BT40RMEWD32114M ••90114424800204,0 5.36040-313632 32 BT50BEWD32127M •63127-4800204,3 5.36050-313732 32 BT50RMEWD32124M ••90124424800206,9 5.36050-313632 32 DO40RMEWD32108M ••90108424800204,0 5.36040-243632 32 DT50RMEWD32108M ••90108424800206,9 5.36050-253632 Note: Possible X adjustment range (radius) for all adaptors from +0.65 mm to -0.15 mm.
Ø d
Safety note: Use only the supplied plug-in nipple withnominal breakage point;
R
1
/
4
" CODE191.469
With coolant ring
1) Without coolant ring
1) ClampingscrewAdjustingscrewBumper barEccentricbushing Dial keyAdjustingscrewClampingscrewEccentricbushing Dial key
1 2) Ø d
1 2) 32 192.941570.850169.974536.088170.236 20 193.203570.850536.090170.236 32 193.204570.850536.091170.236 Order example: (Chuck with eccentric adjustment, MAS 403 BT cone without coolant ring) Taper Protrude length metric BT40 BE WD20 096 M Eccentric Drill-Fix shank
1) Included: Type without coolant ring acc. to DIN 69871 Form B/ADType with coolant ring acc. to DIN 69871 Form A Intermediate sleeve with dial key.
(For coolant ring option: dial key, bumper bar and plug-in nipple with
nominal breakage point.)
2) The eccentric bushing can be assembled with O-rings fitted.
B
65