Die and Mould - Kennametal - #194

/ 380


catalogue search
P. 151
P. 152
P. 153
P. 154
P. 155
P. 156
P. 157
P. 158
P. 159
P. 160
P. 161
P. 162
P. 163
P. 164
P. 165
P. 166
P. 167
P. 168
P. 169
P. 170
P. 171
P. 172
P. 173
P. 174
P. 175
P. 176
P. 177
P. 178
P. 179
P. 180
P. 181
P. 182
P. 183
P. 184
P. 185
P. 186
P. 187
P. 188
P. 189
P. 190
P. 191
P. 192
P. 193
P. 194
P. 195
P. 196
P. 197
P. 198
P. 199
P. 200


See other catalogues for Kennametal

Text version of the page

Drive power

Required Drive Power, Torque and Feed Force

®

Torque

Drive power P
s [kW] Torque M
d [Nm] 400300200100 f = 0,1 mmf = 0,2 mm f = 0,05 mm 2030f = 0,1 mmf = 0,2 mm f = 0,05 mm 020100 807060504030 0200 807060504030
1 [mm] Drill diameter d
1 [mm]

Feed force Note:

Feed force F [kN]Drill diameter d

The diagrams are based on empirical valuesand apply to drilling steel materials with a strength of: Rm = 600 - 900 N/mm

f
2
8642f = 0,1 mm f = 0,2 mm f = 0,05 mm

The base cutting speed used is:v

c

= 200 m/min Guidelines for coolant pressure andquantityNote: DRILL-FIX drills should always be used with cooling lubricant. The more intensive the cooling, the better the drilling performance.

020 10 0807060504030 Drill diameter d
1 [mm]

Coolant quantity Coolant pressure

Coolant quantity V.[l/mi n] Coolant pressure p[bar] 7 25155 642 rotatingstationary 2030 5 020100 807060504030 02030 807060504030

Die and Mould - 7354 B

64
Drill diameter d
1 [mm] Drill diameter d
1 [mm]

pageCatalog pdf di En 2012-02-06-12