Text version of the page

www.kemaico.com

HXY-2BT Drill Rig - 59019 HXY-2BT DRILL RIG

General Introduction

HXY—2BT Core Drill is developed to meet the needs of users and the development of geological works, it is a new type vertical shaft core drill. It is applicated for engineering geological exploration drilling, hydrogeology well drilling and big—hole basic engineering drilling including core drilling with tungalloy—carbid—tipped and diamond bit mainly.

The rig has the following characteristics

1. Light weight, easy removal. 2. Take winch traverse; overcome the fault that wire rope arbitrary intertwine and wear too fast because the winch laid lengthways. 3. The high speed level takes belt transmission to make the drill soft in the uneven formation, and reduce the damage and other mechanical failure. 4. Vertical shaft reamer hole big. 5. The speed range wide, the low speed level torquemoment big, it can be also suitable for engineering geological subterranean water explorations. 6. Drill move stably, position firmly 7. Choose 395 diesel engine or Y180L-4 electric motor.

Specifications

1. Basic parameter: Drilling capacity Drilling type Drilling depth (m) Basic pipe drilling 100 Hydrogeology well drilling 150 Core Drilling 600 2. RotatorDrilling type Drilling depth (m) Drilling type Basic pipe drilling 100 Basic pipe drilling Hydrogeology well drilling 150 Hydrogeology well drilling Core Drilling 600 Core Drilling Drilling type Drilling depth (m) Drilling type

Phone: 0086-851-8639106/ 05/ 07 Fax: 0086-851-8639108