Text version of the page

Küppers Elektromechanik GmbH

Flow Meters

Liebigstr.2 •
D-85757 Karlsfeld •
Tel.+49 81 31/59 39 10 •
Fax +49 81 31/9 26 04

Datasheet Turbine Flow Meter with Flange Ends - 25135 HM...FTurbine Flow Meters

Application

Turbine flow meters are used for the precise measurement of instantaneous flowrates and flow quantities of low-viscosity fluids such as:•Tap and demineralised water•Fuels •Liquefied gases •Pharmaceutical fluids •Solvents •Light fuel oil HM...F turbines are equipped with flanges as per DIN or ANSI.

Advantages

Low contamination risk Fast response time and high resolution The turbinewheel’s low moment of inertia allows a fast acceleration from standstill up to full number of revolutions within 5 to 50 msec. For that reason dynamic measurements can be done. The resolution can amount to as much as 35,000 pulses per litre (cf. technical data, page 2) The spacing of the turbinewheel and bearing mount is wide enough to protect against particles in fluid jamming the turbinewheel. Furthermore the twist of flow in this area has a self-cleaning effect for the bearing. Wide temperature range from –273 up to +350°C Standard turbine flow meters: –20 up to +120°C. Special models for cryogenic liquids: –273°C Special models with high-temperature pickups: up to +350°C
Quality system certified to DIN EN ISO 9001