K14 - D.C. motor 28.41 series - KELVIN - #1

Text version of the page

GEARBOX series Gearbox for continuous work in any position, at room temperature from -15° to 50°C, with torque load up to 1.4 Nm. n Box. Moulded plastic resistant to most detergents and chemical products. Frontal mounting by three Ø2.4 mm. drilled holes for screws DIN 7970 Ø2.9 mm. (# 4). n Gearset. Spur gearset with hardened steel pinions and steel gearwheels which turn on steel shafts attached to the box.The first gearwheel is made of hardened brass. n Output shaft. Steel shaft Ø6 mm. and 10 mm. long with a flat surface, which turns on low friction, long life plastic bearings. n Maximal output shaft load: Axial pull or push (steady load). 50 N • 5 Kg. Radial at 5 mm from flange. 25 N • 2.5 Kg. n Lubrication. Lithium grade 2 grease lubricant. n Weight. With maximal number of stages: 0.04 Kg. OTHER MOTORS. The coupling motor must have: maximal external Ø28 and a maximal recommended speed of 4,500 r.p.m. Centering collar of Ø10 x 2.7 maximal height. Rotor shaft up to 2 or Ø2.3mm. Mounting by two M2.6 threaded holes at 16 mm. centres distance, or three M2 threaded holes in Ø17 mm. at 120°. Your special requests are welcome. TECHNICAL CHARACTERISTICS K14 1,4 Nm