A.C. asynchronous motors G series - KELVIN - #1

Text version of the page

ASYNCHRONOUS MOTORS ð¯ STANDARD execution motor. ð¯ Motor with encoder COE 502. ð¯ Control card VV.. series G... Single-phase asynchronous motors instantaneous start by means of shaded poles. Not RF interferences. High starting torque. Runs silently in whatever position. ð¯ Construction. Single piece magnetic stator plate. Squirrel-cage rotor made of die-cast aluminium. Bearing brackets of die-cast zamak. The rotor turns on sintered-bronze bearing, self-lubricating with a large oil reserve for continuous service S1 higher than 10,000 hours at 30°C . 再Hardened steel shaft, at 4 or Ø6 mm. (depending on versions). ð¯ Protection, IP 00 (CEI 529). ð¯ Insulating, H CEI 85 (EN 60204-1) in self extinguishing plastic reel VO class. ð¯ Voltage test. EN 60204-1. 再Operating voltage: 230 V. 50 Hz. (For others, ask for information). ð¯ Connection by Faston 6.35 terminal. ð¯ Operating in room temperatures within -10 and 50°C with overheating T 70°C. ð¯ Five stack versions with thicknesses 11 - 16 - 20 - 30 and 40 mm. ð¯ OPTIONAL. ð¯ Winding for increased torque R or twice increased torque BR to operate with cooling fan, or intermittent operation by specification (thermal protector recommended). ð¯ Winding for decreased torque D for continuous operation in room temperatures up to 70°C. ð¯ Thermal protector on all types, except G411. ð¯ Flexible cable connections. ð¯ Two-directional turning is obtained by two stators mounted in tamden. Exclusively in types G411 - G416 and G620. ð¯ Rotor turning on ball bearings only with Ø6 axle exclusively in types G620 - G630 - G640. ð¯ Shaft lengths greater than standardized, available on request. ð¯ Electromagnetic or electronic brakes. ð¯ Electronic speed changer at constant torque VV with encoder COE 502 up to 20:1 ratio. Your special requests are welcome. TECHNICAL CHARACTERISTICS