4 pages in the catalogue
I-V Measurements of Nanoscale Wires and Tubes |
 |
I-V Measurements of Nanoscale Wires and Tubes p 1 number 2481 l-V Measurements of Nanoscale Wires and Tubes with the Model 4200-SCS and Zyvex S100 Nanomanipulator KEITH LEY Application Note Series Introduction It is difficult to characterize very sm... |
 |
I-V Measurements of Nanoscale Wires and Tubes p 2 Theory of Four-Point Measurements A solution to the problem of two-point measurements that measure the lead and contact resistance along with that of the device under test (DUT) is the four-wire or "... |
 |
I-V Measurements of Nanoscale Wires and Tubes p 3 keep ambient temperatures constant, equipment should be kept away from direct sunlight, exhaust fans, and similar sources of heat flow or moving air. Wrapping connections in insulating foam (e.g., po... |
 |
I-V Measurements of Nanoscale Wires and Tubes p 4 Test System Safety Many electrical test systems or instruments are capable of measuring or sourcing hazardous voltage and power levels. It is also possible, under single fault conditions (e.g., a pro... |
