COMBIVERT F6
16Pages

{{requestButtons}}

Catalog excerpts

COMBIVERT F6 - 1

COMBIVERT F6 DRIVE CONTROLLER 4 ... 400 kW EN

Open the catalog to page 1
COMBIVERT F6 - 2

Benefits at a filarne I

Open the catalog to page 2
COMBIVERT F6 - 3

SYSTEM OVERVIEW Automation with Drive stands as a synonym for optimally selected combinations of control and automation solutions with the drive level at the end it is the key to ­successful machine concepts. Let the following pages inspire you with regards to the diversity and ­performance of the COMBIVERT F6 drive controller, and help you to find a solution that reliably meets your requirements. COMBIVIS studio HMI COMBIVIS studio 6 COMBIVIS connect COMBIVIS studio HMI COMBIVIS studio 6 COMBIVIS connect CONNECT ROUTER RESET RUN / STOP COM Rx CONNECT ROUTER RESET POWER REMOTE CONNECT COM...

Open the catalog to page 3
COMBIVERT F6 - 4

COMBIVERT F6 - BENEFITS AT A GLANCE OPTIMALLY SELECTED COMPONENTS Flexibility, functionality, efficiency and cost-effectiveness are the key requirements for today‘s drive system. The single axis drive controller COMBIVERT F6, ­ in the power range from 4 to 400 kW is covering these requirements and is a perfect extension of the KEB drive portfolio. The COMBIVERT F6 with its capability to operate different motor types, the various real-time communication to higher-level controllers, the choice of integrated Safety function modules or the cooling concept is the perfect drive controller for...

Open the catalog to page 4
COMBIVERT F6 - 5

DRIVE BASED SAFETY ALL IN ONE - UNIVERSAL MOTOR OPERATIONS Integrated Safety functionality Basic function STO in System version Additional High Level Safety in Application version Control for synchronous, asynchronous, IPM or synchronous reluctance motors ­ Motor operation with encoder feedback or encoderless ASCL/SCL ­ for precise speed control Motor temperature monitoring with PTC, KTY or PT1000 sensors Two-channel multi-encoder interface Integrated GTR7 brake transistor Integrated brake control and brake supply REAL - TIME COMMUNICATION or simply serially • Real-time Ethernet-based...

Open the catalog to page 5
COMBIVERT F6 - 6

COMBIVERT F6 - VERSIONS COMPACT FUNCTIONAL SAFETY HIGHLY INTEGRATED AND ECONOMICAL Highest integration, best performance and a good price/power ratio. These are the benefits of the F6-compact version. INTERFACES CAN interface Realtime Ethernet In addition the integrated Safety function STO as per ISO 13849-Perfomance Level e/IEC 62061-SIL3 are available. REALTIME ETHERNET INTEGRATED LCD DISPLAY LCD Operator 00F6P00-1000 Ethernet Operator 00F6P00-2000 USB Operator 00F6P00-3000 ETHERCAT OR VARAN and communication interfaces as standard CAN DIAGNOSTIC RS 232/485 BRAKE CONTROL 24 V / 2 A MAINS...

Open the catalog to page 6
COMBIVERT F6 - 7

I/0 8 digital inputs 2 digital outputs 1 relay 2 analog inputs 1 analog output 24V DC supply APPLICATION MODULAR AND FLEXIBLE Modular and flexibility are the summerized characteristics of the F6-Application version. STO and speed/position related safety functions as per ISO 13849. STATUS LEDS DIAGNOSTIC INTERFACE MULTI ENCOCER INTERFACES Resolver, EnDAT, HIPERFACE, BISS, SSI, Incremental HTL/TTL, Incremental output MOTOR TERMINALS with stud terminals from housing size 6 REALTIME ETHERNET INTEGRATED ETHERCAT PROFINET POWERLINK and communication interfaces as standard DC SUPPLY TERMINALS and...

Open the catalog to page 7
COMBIVERT F6 - 8

HIGHLIGHTS • Possible download of encrypted data packets through machine controllers • Modular safety concept • Dual channel ripple interface for cascading functional safety over multiple KEB drives • Dual OSSD outputs for supply of the safe digital inputs (detection of wire break, shortcut and external supply) • Safe parameterization through COMBIVIS 6 with protected operation levels

Open the catalog to page 8
COMBIVERT F6 - 9

FUNCTIONAL SAFETY SAFETY FUNCTIONS ACCORDING TO IEC 61508–SIL3, ISO 13849–PL e With the drive-based-safety, safety functions are shifted into the drive platform and the costs of separate protective devices are reduced. The drive controllers COMBIVERT F6 are prepared for the different requirements in their modular structure. In the compact version F6-K, STO is an „on board“ integrated component. The application version F6-A can be equipped with different safety modules. Depending on the requirement, basic functions with the SM1 and a wide range of functions are available with the SM3, which...

Open the catalog to page 9
COMBIVERT F6 - 11

* in preparation ** air cooled in-built version

Open the catalog to page 11
COMBIVERT F6 - 12

COMBIVIS 6 - THE TOOL FOR ALL TASKS COMBIVIS 6 • • • • • • Free and easy-to-use software for startup, administration and analysis Integrated start-up assistants (Wizards) for quick and easy configuration Direct access to device documentation 16 channel oscilloscope for extensive analysis Online parameter list comparison Parameterisation of key safety indicators and functions COMBIVIS studio 6 The intelligent automation suite from KEB combines an assistant-guided component selection, fieldbus configuration, drive parameterisation,­ IEC 61131-3 project generation and motion control....

Open the catalog to page 12
COMBIVERT F6 - 13

INTEGRATED DEVELOPMENT ENVIRONMENT COMMISSIONING ASSISTANT SYSTEM CONFIGURATION AS A NEW COMPONENT OF COMBIVIS Complete user guidance through the commissioning process KEB Motor database, free for extensions Anti cogging Fieldbus diagnostic and optimisation Access to complete KEB product database Intuitive gear component selection and system configuration using drag and drop Selection assistant with display of compatible components Display of all interfaces and connection components Material number generator Extensive export function for quote list, Combivis Project, Excel ... IEC 61131-3...

Open the catalog to page 13
COMBIVERT F6 - 14

ACCESSORIES STABLE OPERATION IN INDUSTRIAL ENVIRONMENT An EMC-compliant assembly with efficient control cabinet and suppression system is the basis for safe operation of machinery and equipment. The current and voltage limiting COMBILINE modules are optimally designed to meet the requirements of the COMBIVERT F6 drive controller series and support ­ the use through: L1 L2 L3 PE L1.1 L2.1 L3.1 PE COMBILINE Mains choke or harmonic filter L1.2 L2.2 L3.2 PE MAINS EMC FILTERS Reduce the cable-fed emission to the required limits IEC 61800-3 - C1/C2. Further variants offer low leakage currents or...

Open the catalog to page 14

All KEB Automation KG catalogs and technical brochures

  1. COMBIVERT F6

    18 Pages

  2. 13F6A12-3A11

    1 Pages

  3. 12F6K1D-3AMA

    1 Pages

  4. 12F6A12-3A11

    1 Pages

  5. MP IE4 MOTORS

    44 Pages

  6. C6 ROUTER

    10 Pages

  7. I/O System

    19 Pages

  8. C6 AMM

    6 Pages

  9. C6 Monitor

    6 Pages

  10. C6 P34 BM

    6 Pages

  11. C6 E22 BM

    6 Pages

  12. C6 P34 Box

    6 Pages

  13. C6 E22 Box

    6 Pages

  14. C6 P34 Panel

    6 Pages

  15. C6 E22

    6 Pages

  16. C6 SMART

    6 Pages

  17. C6 COMPACT

    6 Pages

  18. C6 S14

    6 Pages

  19. C6 HMI-LC

    6 Pages

  20. C6 HMI

    6 Pages

  21. COMBIVERT F6-K

    12 Pages

  22. Servo Motors

    16 Pages

  23. COMBIVERT R6

    8 Pages

  24. COMBILINE

    28 Pages

  25. COMBIVERT F5

    32 Pages

  26. COMBIVERT G6

    16 Pages

  27. COMBIVERT H6

    24 Pages

  28. COMBIVERT S6

    24 Pages

  29. KEB DRIVE

    130 Pages

Archived catalogs