6 7 CD-PRINT CD/DVD Offset Printing Operation Clear instructions from the director: user-friendly handling CD-Print technical data Print process Printing system: waterless offset printing Printing units: 4 offset printing units (standard equipment) (5th or 6th printing unit optional) 1 white flat industrial screen printing unit with UV dryer, 1 varnishing unit Ink: UV –hardening ink Capacity: 100 pieces/minutes (6,000 pieces/hr) Printing materials / formats Printing material: conventional CD, DVD, BD Material thickness max. 1.2 mm (0.047“) Printing plates (waterless, analogue or digital) Format / thickness: 253.5 x 150 x 0.15 mm (9.98 x 5.9 x 0.006“) Dimensions and weight (4 printing units plus white basic unit and varnishing unit) Length x width x height: 6,486 x 2,920 x 1,820 mm (255.4 x 115.0 x 71.7“) Total weight: approx. 3.8 tons (8.380 lbs) Easy access to the cylinders: only a few steps are needed to mount the printing plates. Electrical supply Supply voltage: 400 / 230 V Network structure: TN-S, 3L, N, PE Frequency: 50 / 60 Hz Current strength: 60 A/Phase Connected performance: 40,000 VA Fusing: 63 A UV drier Light arc length: 150 mm (5.9“) Power consumption: max. 2.250 Watt Lamp current: approx. 16 A (100 % output) Lamp voltage: approx. 150 V (100 % output) Pneumatic supply Air connection: 6 bar (87.0 psi), 1/4” Air consumption: max. 200 l/min Emissions Noise: max. 76 db(A) Technical alterations reserved Short inking on the CD-Print deliver photorealistic offset quality results, and it makes the system easy to use. Complete novices without special skills are able to effectively use the CD-Print after only a few hours of operator training. Operators use a well-designed, multilanguage touchscreen to adjust the lateral and circumferential register, change the temperature of the cylinders or recall stored reproduction parameters from the controller. The time consuming adjustments of ink zones and distributing rollers, which can only be performed by skilled offset printers, have been eliminated without any negative impact on quality. This saves you time, money and material. The print stations are stacked vertically and can be pulled out for convenient access, making it easy to clean the cylinders and replace the printing plates. This reduces reaction and changeover time. Quick-action clamps make it possible to mount the printing cylinders in a single revolution of the cylinder. KBA-Metronic AG offers digital and analogue makeready equipment for producing the plates which can be reused. The delivery spindle conveyor specification reduces the distance that the operators need to move. This allows them to concentrate fully on the printing process and gives them the benefit of fully automatic operation. For ease of maintenance, Internet-based remote maintenance capability is supplied as option, providing a way of linking the CD-Print directly with the KBA-Metronic AG Service Center. Complete CD-Print system with four print stations, feed and delivery compacts on a very small footprint.