KBWA Hybrid Drive - NEMA 1 / IP 20 & IP 50
4Pages

{{requestButtons}}

Catalog excerpts

KBWA Hybrid Drive - NEMA 1 / IP 20 & IP 50 - 1

Hybrid Drive A Digital AC Drive with Analog Interface KBWA-23D Vented NEMA 1 / IP 20 Enclosure Primary Features Front Panel Power On/Off Switch GFCI Compatible With factory programming, allows the equipment to operate with Ground Fault Circuit Interruption circuit breakers or outlets. Saves Time Easy to Install and Simple to Operate Does not require programming Up and running in less than 10 minutes. Motors Last Longer Provides overload protection, prevents motor burnout and eliminates nuisance tripping. UL approved as electronic overload protector for motors. Energy Saving Uses only the power the application requires. Replacing constant speed with variable speed will significantly reduce energy costs. AC MOTOR SPEED CONTROL Hybrid Drive™ KBWA SERIES • NEMA 1 / IP 20 When an off the shelf drive does not meet your needs, we will work with you to provide a custom drive solution, Ready to Use, "Out-of-the-Box." Customization includes: Pre-calibrating or programming of a stock control, adding a custom label or branding, custom software, PLC functions or designing a new control. *Lower horsepower models available (KBWA-21D, 2P3D, 2P6D). kbelectronics.com • info@kbelectronics.com

Open the catalog to page 1
KBWA Hybrid Drive - NEMA 1 / IP 20 & IP 50 - 2

Additional Features Sensorless Flux Vector Control Flux Vector Compensation with Static Auto-Tune provides excellent speed regulation with high torque loads throughout the entire speed range. Auto energy saving at light loads. Smooth motor torque. Electronic Inrush Current Limit (EICL™) Protection Eliminates harmful inrush AC line current during power up. Provides smooth recovery to the previous set speed during a momentary power loss. Holding Torque at Zero Speed Resists motor shaft rotation when the drive is in “Stop” mode. Regeneration Protection Eliminates tripping due to high bus...

Open the catalog to page 2
KBWA Hybrid Drive - NEMA 1 / IP 20 & IP 50 - 3

Ratings 115/230 VAC 1-Phase Input • 230 VAC 3-Phase Output Ratings Model No. KBWA-22D KBWA-23D Enclosure NEMA 1 / IP 50 NEMA 1 / IP 20 Notes: 1) Rated 1.3 Amps on 115 VAC input. 2) Rated 2.2 Amps on 115 VAC input. Specifications Maximum Load (% of Current Overload for 2 Minutes) Switching Frequency (kHz) Output Frequency Resolution (Hz) Minimum Output Frequency to Motor (Hz) Acceleration Time (Seconds) Deceleration Time (Seconds) Speed Range (Ratio) Speed Regulation (30:1 Speed Range, 0 – Full Load) (% Base Speed) Stalled Motor Trip Time (Seconds) Braking Operating Temperature Range (ºC /...

Open the catalog to page 3
KBWA Hybrid Drive - NEMA 1 / IP 20 & IP 50 - 4

Control Layout Adjustable Trimpots COMP: Slip Compensation ACC: Acceleration DEC: Deceleration MIN: Minimum Speed MAX: Maximum Speed CL: Current Limit Diagnostic LEDs Status (ST): Green/Yellow/Red Power On (PWR): Green Terminals P1, P2, P3 To Factory Installed Main Speed Potentiometer CON2 (F-S-R) Remove Jumper to Install Forward-Stop-Reverse Switch (Supplied) Terminals L1A, L2A, L1B, L2B To Factory Installed On/Off AC Line Switch Violet Orange White Red White Black White Blue White Blue CON1 (A/M) Automatic Start Mode: Jumper Installed (Factory Setting) Manual Start Mode: Jumper Removed...

Open the catalog to page 4

All KB Electronics catalogs and technical brochures

  1. KBMM (SMT)

    32 Pages

  2. RFAC-24

    1 Pages

  3. KBWK-23D

    40 Pages

  4. KBVF series

    44 Pages

  5. KBMK

    4 Pages